Bosch VIP XD, Инструкция по установке и эксплуатации

Страница: 67 / 86

VIP XD | Installation and User Guide EN | 67
Bosch Security Systems | 2005-05 | V1.0 Operation with a terminal program
Operation with a terminal program
7
As well as using Microsoft Internet Explorer, you can also control the
establishment of a connection from the VIP XD using a terminal program, for
example the HyperTerminal program that is part of Windows.
Connecting with a terminal program
Various requirements must be met in order to operate using a terminal program
(see page 19).
– Start the terminal program and enter the command
1
in the main menu to
switch to the IP menu.
– Enter the command
4
in the IP menu to change the remote IP address, then
enter the IP address of the device to connect to.
– Use the command
0
to return to the main menu.
– Enter the command
4
to switch to the Rcp+ menu.
– Enter the command
5
in the Rcp+ menu to activate the automatic connection.
Closing the connection with a terminal program
– Start the terminal program (see page 19); enter the command
4
in the main
menu to switch to the Rcp+ menu.
– Enter the command
5
in the Rcp+ menu to deactivate the automatic
connection.
Additional parameters
Using the terminal program, you can check other basic parameters and modify
them where necessary. Use the on-screen commands displayed in the various
submenus to do this.