2
en | Getting Started
AutoDome Modular Camera System
F01U073308 | 3.0 | 2007.09
VG4-200, VG4-300, VG4-500i Series User’s Manual
Bosch Security Systems, Inc.
1.2.2
Keyboard Commands
Keyboard control commands are composed of a sequence of three (3) inputs with the
following convention: 1) a
Function
key + 2) a
Command
number key(s) + 3) the
Enter
key.
–
Depending on the type of keyboard, the control function keys are labeled:
ON
or
AUX ON
OFF
or
AUX OFF
SET
or
SET SHOT
SHOT
or
SHOW SHOT
–
Command numbers range from 1 to 999. See Chapter 6: Keyboard Commands by Number
for a complete list of keyboard commands.
–
The
Enter
key can also be labeled with the 8 symbol.
For example, the keyboard command to make the AutoDome pan 360º continuously is:
ON-1-ENTER
Press the
ON
key, then press the number
1
key, and then press
ENTER
.
1.3
Setting the Camera Address
Once the AutoDome power is turned on and homing is complete, you must set the camera
address. You may also want to assign a password and customize some of the AutoDome
default settings.
1.3.1
FastAddress
FastAddress is an AutoDome feature that allows you to set or change a camera address using
the keyboard and on-screen menus.
There are three (3)
FastAddress
commands:
–
ON
-
999
-
ENTER
: Displays and programs all cameras without an address in the system.
–
ON
-
998
-
ENTER
: Displays and programs all cameras with or without an address in the
system.
–
ON
-
997
-
ENTER
: Displays the current address status of all cameras in the system
simultaneously.
i
NOTICE!
The convention used for control key commands in this manual is
ON
,
OFF
,
SET
, and
SHOT
. Refer to your keyboard manual for the key naming conventions.
i
NOTICE!
You do not need to set a camera address if using Bilinx or Ethernet communication.
See the AutoDome Installation Manual to configure an AutoDome for Bilinx or Ethernet
operation.
i
NOTICE!
If a keyboard is set to a camera number that already has an address, that camera
also responds to this command.
