AutoDome Modular Camera System
Common AutoDome User Commands (unlocked) | en
23
Bosch Security Systems, Inc.
VG4-200, VG4-300, VG4-500i Series User’s Manual
F01U073308 | 3.0 | 2007.09
3
Common AutoDome User Commands (unlocked)
This chapter details the commonly used BOSCH keyboard setup commands. See
Section 6 Keyboard Commands by Number
, page 31 for a complete list of commands.
3.1
Setting AutoPan Mode
AutoPan
mode pans a PTZ camera 360º or pans between user defined limits (when
programmed). The PTZ camera continues to pan until stopped by moving the joystick.
To pan 360º:
1.
Press
ON
-
1
-
ENTER
.
2.
Move the joystick to stop the pan.
To set left and right pan limits:
1.
Move the camera to the starting position and press
SET
-
101
-
ENTER
to set the left limit.
2.
Move the camera to the end position and press
SET
-
102
-
ENTER
to set right limit.
To start Auto-pan between limits:
1.
Press
ON
-
2
-
ENTER
.
2.
Move the joystick to stop the pan.
3.2
Setting Preset Shots
Preset shots are saved camera positions. Shots are saved as scenes, therefore, the terms
SHOT
and
SCENE
are used interchangeably.
To set a Shot:
1.
Move the camera to the position you want to save.
2.
Press
SHOT
-#-
ENTER
where # can be a number from 1 to 99 that identifies the camera
position of the scene. (shots 1-64 for a 200 Series AutoDome.)
To view a Shot:
X
Press
SHOT
-#-
ENTER
where # is the number of the scene position you want to view.
To store or clear a Shot:
1.
Press
SET
-
100
-
ENTER
to access the
Store
/
Clear Scene Menu
.
2.
Follow the on-screen instructions.
3.3
Configuring Preposition Tours
A
Preposition Tour
automatically moves the camera through a series of preset or saved shots.
The 200 Series has one (1) standard preset tour available, while the 300 and 500i Series has
two (2) standard preset tours and two (2) customized preset tours. Tour 1 is a standard tour
that moves the camera through a series of shots in the sequence they were set.
Tour 2
is a
custom tour that allows you to change the sequence of shots in the tour by inserting and
deleting scenes.
To start Preposition Tour 1: (200, 300, and 500i Series)
1.
Set a series of preset shots in the order that you want the AutoDome to cycle through.
2.
Press
ON
-
8
-
ENTER
to start the tour. The tour then cycles through the series of shots until
it is stopped.
To stop a Preposition Tour:
X
Press
OFF
-
8
-
ENTER
or move the joystick to stop either type of tour.
