Bosch VEZ IP Series, Руководство по установке

Страница: 65 / 153

AutoDome Easy IP Navigating the Menus | en 59
Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08
10.2.1 Setting a Tour
The AutoDome Easy IP is designed to set up to four (4)
customized sequences of preset shots covered by the
AutoDome Easy IP camera. To set a tour, proceed as follows:
1.
Press the Aux Control tab then press 4 + 6 + Aux On via the
on-screen keypad to access the main menu.
2. To navigate throughout the on-screen menu, press the
View Control tab to access the on-screen joystick.
3. Press the down arrow on the on-screen joystick with your
mouse, select TOUR, then press the right arrow to display
the menu options.
4. Press the right arrow to select the desired tour number (1-
4).
5. To edit the title, see Section 10.1.3 Creating Titles , page 57.
6. Press the down arrow to select the DWELL TIME field.
7. Press the right arrow to increase the time or the left arrow
to decrease the time (05-99 SEC).
8. To set the sequence of preset shots, press the down arrow
on the on-screen joystick to select the ========== field,
then press the zoom in button once to access the
numbers. A number is displayed and the cursor starts
blinking, indicating that it is in Edit mode.
9. Press the zoom in or zoom out buttons to scroll
through the numbers of previously defined preset shots.
The zoom in button moves the numbers forward and
the zoom out button moves the numbers backward.
Note: A preset shot must have been set in order to select it
in the Tour menu.
10. Press the right arrow button after reaching the desired
letter or number. The number stops blinking. Press the
zoom in button once and repeat.
11. When satisfied with the preset tour, select SAVE AND EXIT.
To exit without saving, select EXIT W/O SAVE.