Bosch VEZ IP Series, Руководство по установке

Страница: 57 / 153

AutoDome Easy IP Viewing Live Images and Controlling the PTZ | en 51
Bosch Security Systems, Inc. Installation Manual F01U079609 | 1.0 | 2008.08
To enter a keyboard control command:
1. Place the cursor in the command number field.
2. Click the desired command number via the on-screen
keypad.
3. Click either the Aux On or the Aux Off button to initiate or
stop the command. See Chapter 13: Keyboard Commands
by Number on page 133 for a list of commands.
4. If the command initiates a menu, use the arrows via the on-
screen joystick within the View Control tab to navigate
throughout the menu. Click the right arrow button to
select a menu item.
To set a preset shot (see also):
Preset shots (or scenes) are camera positions that are saved in
the memory for future use. See
Section 10.1.1 Setting and
Saving Presets , page 56 for more information.
1. Click the View Control tab and use the on-screen joystick
to position the camera.
2. Click and hold the mouse to pan to the desired position
you want to save.
3. Click any number combination from 1-60 from the on-
screen keypad to identify the scene number.
4. Click the Set Shot button. The image area displays a
message that indicates which shot number it is saving or if
you are about to save over an existing shot, the image area
displays a message asking if you want to OVERWRITE
CURRENT SCENE.
!
WARNING!
If the message OUT OF SEQUENCE is displayed, a preset save is
being attempted that is not available. All preset positions must
be set in sequential order. To verify the next number in the
sequence, enter the Preset menu and scroll through the saved
presets. The last number displayed is the next available preset
position.