54
en
Technical specifications
Technical specifications
Power connection (voltage – frequency)
220-240 V – 50/60 Hz
Power rating
1600 W
Maximum static pump pressure
19 bar
Maximum water tank capacity (without filter)
2.4 l
Maximum capacity of the coffee bean container
~300 g
Length of power cable
100 cm
Dimensions (H x W x D)
385 x 301 x 458 mm
Weight, empty
10–12 kg
Type of grinding unit
Ceramic
Simple troubleshooting
Problem
Cause
Solution
Too little or no milk froth,
or the milk frother
10
does
not draw the milk in.
The milk frother
10
or its
holder is soiled.
Clean the milk frother
10
or its
holder (see “Cleaning the milk
system”).
Milk unsuitable for frothing. Use low-fat milk (1.5 % fat).
The milk frother
10
is not
correctly assembled.
Moisten and assemble the milk
frother parts.
Build-up of limescale in the
appliance.
Descale the appliance as
described in the instructions.
No tea water dispensed.
The milk frother
10
or its
holder is soiled.
Clean the milk frother
10
or its
holder (see “Cleaning the milk
system”).
The selected per-cup
quantity is not reached.
Coffee dispensing slows
to a trickle or stops
completely.
Coffee is ground too finely.
Pre-ground coffee is too
fine.
Adjust the grinding unit to a
coarser setting. Use coarser pre-
ground coffee.
Build-up of limescale in the
appliance.
Descale the appliance as
described in the instructions.
Coffee has no “crema”.
Unsuitable type of coffee.
Use a type of coffee with a
higher proportion of robusta
beans.
The beans are no longer
fresh.
Use fresh beans.
The grinding setting is not
suitable for the beans.
Adjust the grinding setting to
fine.
Coffee is too “acidic”.
The grinding setting is too
coarse or the pre-ground
coffee is too coarse.
Adjust the grinding unit to a finer
setting or use finer pre-ground
coffee.
Unsuitable type of coffee.
Use a darker roast.
If you are unable to solve the problem, always call the hotline!
You will find the telephone numbers at the back of these instructions.
