45
en
Preparing milk froth and warm milk
Drink preparation with milk
The appliance must be ready for use.
■
Place the suction pipe
10d
of the milk
frother
10
deep in the milk container
26
.
■
Swivel the coffee outlet
9
to the
right
until
it clicks into place.
■
Place the pre-warmed cup or glass under
the coffee outlet
9
and milk frother
10
.
■
Select the required
Caffe Latte
Ä
(depending on the model),
Macchiato
Å
,
Cappuccino
Æ
or
My coffee
Ç
(depending on the model) by turning the
rotary knob
6
.
■
Open the powder compartment
18
.
■
Pour in no more than 2 level measuring
spoons
14
of ground coffee.
W
Warning!
Do not use whole beans or instant coffee.
■
Close the powder compartment
18
.
■
Press the
start
button
8
.
First milk is delivered into the cup or glass.
Then the coffee is brewed and dispensed
into the cup or glass.
Important:
Dried milk residue is difficult
to remove, so the milk frother
10
must
be
cleaned with lukewarm water immediately
after use (see “Cleaning the milk system”).
Note:
Repeat the procedure for another
cup of coffee / milk drink. If coffee is not
dispensed within 90 seconds, the brewing
chamber empties automatically to avoid an
overflow. The appliance rinses.
Preparing milk froth and
warm milk
W
Risk of burns!
The milk frother
10
gets very hot. After use,
allow to cool down first before touching.
The appliance must be ready for use.
■
Place the suction pipe
10d
of the milk
frother
10
deep in the milk container
26
.
■
Place the pre-warmed cup or glass under
the outlet of the milk frother
10
.
■
Select the required setting
Milk froth
È
or
Warm milk
É
by turning the rotary
knob
6
.
■
Press the
start
button
8
.
Milk froth or warm milk flows from the outlet
of the milk frother
10
.
Press the
start
button
8
again to cut the
process short.
Info:
When preparing warm milk, you may
hear a whistling sound. This is caused by
the milk frother
10
for technical reasons.
Tip:
For optimal milk froth quality, use cold
milk with a fat content of at least 1.5 % if
possible.
Important:
Dried milk residue is difficult
to remove, so the milk frother
10
must
be
cleaned with lukewarm water immediately
after use (see “Cleaning the milk system”).
