Solution 16
plus
26
Bosch Security Systems 09/06 BLCC100R
Quick Start Guide
Comms > Telephone Number >
Call Forward Off
MENU 5-1-7
1
Digits
32
# 6 1 #
Use [
] and [
] Keys To Scroll Cursor. Enter [0] – [9] For Telephone
Digits. Use [
] and [
] To Toggle Special Characters
# and , (Pause)
Comms > Properties >
Call Attempt Count
MENU 5-2-0
0 6
Enter 0 - 15 Then Press [OK] To Program The Maximum Call Retry
Attempts Per Destination
Comms > Properties >
Dialer Options
MENU 5-2-1
1
Dialler Enabled
Y
2
Pulse Dialling
N
3
Dial Tone Detect
Y
4
Busy Tone Detect
N
5
Mirror Reports To Web
Y
6
Extend Handshake Wait Period To 1 Minute
N
7
Reserved
N
8
Abort Failed Reports
Y
Use Keys [
] and [
] to scroll up and down the option list. With option
selected press ON / OFF key to enable or disable option. [
] will display
to indicate option set. Press [OK] To Save when finished.
Comms > Properties >
Phone Line Options
MENU 5-2-2
1
Display Telephone Line Fail
Y
2
Report Telephone Line Fail
Y
3
Alarm On Line Fail If Armed
Y
4
Alarm On Line Fail If Disarmed
N
5
Reserved
N
6
Reserved
N
7
Reserved
N
8
Display Phone In Use
N
Use Keys [
] and [
] to scroll up and down the option list. With option
selected press ON / OFF key to enable or disable option. [
] will display
to indicate option set. Press [OK] To Save when finished.
Comms > Properties >
Country
MENU 5-2-3
1 = Australia
0
2 = New Zealand
7 = Portugal
12 = China
3 = Italy
8 = Hungary
13 = Hong Kong
4 = Greece
9 = Czech Republic
14 = Malaysia
5 = Cyprus
10 = Poland
15 = Brazil
6 = Spain
11 = Bulgaria
Use Keys [
] and [
] keys or enter 0 – 15 + [OK] To Set Which Country
The Panel Is Being Used In. Only 1 Option Can Be Programmed.
(***
System Wide Parameter ***)
Comms > Properties >
Set SMS Pasword
MENU 5-2-7
p a
s
s w d
Use keys 0 - 9 To Program SMS Pa [OK] To Save. Use [
] and
[
] Keys To Scroll Cursor. Default password is for Telstra in Australia.
Comms > Remote Access >
Call Back Number
MENU 5-3-0
1
Digits
32
Use [
] and [
] Keys To Scroll Cursor. Enter [0] – [9] For Telephone
Digits. Use [
] and [
] To Toggle Special Characters
# and , (Pause)
Comms > Remote Access >
RAS Security PIN
MENU 5-3-1
1 2 3 4 5 6 7 8
Use keys 0 - 9 To Program RAS Security PIN + [OK] To Save
Comms > Remote Access >
Log Threshold
MENU 5-3-2
7 0 %
Enter 0 - 9 To Program Log Thr [OK] To Save
Comms > Remote Access >
Ring Count
MENU 5-3-3
0 = No Answer
10
1 to 15 = Answer Ring Count
Use Keys [
] and [
] keys or enter 0 - 15 Then Press [OK] To Program
The Ring Count - Single Option Only
Comms > Remote Access >
Solution Link RAS Options
MENU 5-3-4
1
RAS Allowed
Y
2
Call Back Verification Required
N
3
Terminate RAS on Alarm
Y
4
Answer Machine Bypass
Y
5
Answer Incoming Call Only If Armed
N
6
Tone Bypass
Y
7
Allow User Functions Via Remote Access Software
Y
8
Report / Log RAS Start / End Sessions
Y
Use Keys [
] and [
] to scroll up and down the option list. With option
selected press ON / OFF key to enable or disable option. [
] will display
to indicate option set. Press [OK] To Save when finished.
