11
Bosch Security Systems 09/06 BLCC100R
Solution 16
plus
Quick Start Guide
Status Icons / LED’s
The following table lists the function of each of the ICON
Symbols and LED Indicators on the Graphic Keypad
Display.
Icon
Status
Meaning
The keypad can display which areas (1 – 8) are
turned on or off via the Area Icon Indicators.
This programmable option can be disabled in
MENU
On
The area is turned All On or Part
On
Off
The area is turned Off
Flashing
Fast
The area has an alarm
On
System power is normal
Flashing
System power is missing
Flashing
A fire alarm is active
Off
No fire alarm
On
Fire alarm in memory (Turn the
area All On and Off to Clear).
On
The existing service or trouble
condition has been acknowl-
edged.
Off
No service or trouble conditions
exist
Flashing
A service or trouble condition is
present that has not been ac-
knowledged.
On
The area is turned Part On.
Off
The area is not turned Part On.
On
The area is turned off.
Off
The area is turned All On or Part
On
On
The area is turned All On
Off
The area is turned Off
On
You have mail waiting to be read
Off
No Mail
On
Area is ready to turn on
(All On / Part On)
Off
Not ready, Zone Open
Red
LED
On
All On
Flashing
Alarm
Green
LED
On
Area is off.
Flashing
Area not ready to turn on
Red &
Green
LED
Flashing
Installer programming mode is
active.
Keypad Tones
All keypads emit several distinct tones and display text
to alert you to system events. The volume of the keypad
tones can be adjusted in MENU 6-1-0.
Type
Meaning
Fire
Alarm
Tone
When a fire zone sounds an alarm, the
keypad will sound 3 seconds on and 2
seconds off (repeat).
Burglary
Alarm
Tone
When a burglary zone activates while your
system is turned on, your keypad emits a
continuous siren tone. It sounds for the
time set by your security company.
Trouble
Tone
When a system component is not
functioning properly, your keypad sounds
4 fast short beeps followed by a 5 second
pause (repeat).
Key Press
Tone
Pressing any key on the keypad sounds one
short beep, indicating that the key press is
accepted.
Entry
Delay
Tone
When you enter the premises through
a zone programmed for entry delay, the
keypad sound a Hi/Low tone to remind you
to turn off the area. If the area is not turned
off before the entry delay expires, an alarm
condition will sound and a report may be
sent to your alarm company.
Exit
Delay
Tone
After you turn an area All On, the keypad
will sound 1 short beep every second.
During the last 10 seconds fast short beeps
will be heard. If you don’t exit before the
delay time expires and an exit delay door is
faulted, an alarm occurs.
Error
Tone
If you press an incorrect key, your keypad
will sound a 2 second tone.
Menu
Mode
The keypad will sound a Hi / Lo tone to
indicate you have entered MENU Mode and
a Lo/Hi tone to indicate you have exited
MENU mode.
Chime
Tone
The keypad sounds fast short beeps to alert
you when a zone programmed for chime is
faulted or unsealled.
