Bosch SCT 815, Оригинальная инструкция по эксплуатации, Страница: 18 / 272

1 689 989 475 | 2020-05-01 Robert Bosch GmbH
4712008-06_shd
1
2 1
(1) Mount for laser range finder
(2) Prismatic reflector
5. Make sure the edges of the prismatic reflector
(1)
are aligned with the centers of the notches (2) in the
mount for the laser range finder.
4712008-10_shd
2
1
2
1
(1) Edges of prismatic reflector
(2) Notches in mount for laser range finder
Should the edges of the prismatic reflector be
misaligned with the centers of the notches, the
mount for the laser ranger finder will be inaccur‐
ately positioned. As a consequence, SCT 815 can‐
not be correctly aligned.
6. Insert the laser range finder
(1)
into the horizontal
shelf
(2)
.
1
2
3
4712008-07_shd
(1) Laser range finder
(2) Horizontal shelf
(3) Positioning foot
7. Use the positioning foot
(3)
to level SCT 815 based
on the inclination angle indicator of the laser range
finder.

WARNING – severe eye damage from laser beam.
8. Never look directly into the laser source.
9. To test function, hold an object in front of the exit
point of the laser range finder.
10. Switch on the laser range finder.
11. Adjust the height of the prismatic reflector in such a
way that the laser point marks the center of the
bumper.

The laser range finder indicates the current dis‐
tance between SCT 815 and the bumper.
The laser range finder measures distance contin‐
uously. If the position of SCT 815 changes, the
new distance from the bumper will be shown on
the display of the laser range finder.
12. Make sure the back of the laser range finder touches
the rear stop of the horizontal shelf.
1
2
3
4712008-08_shd
(1) Laser range finder
(2) Rear stop of horizontal shelf
(3) Mount for laser range finder
If the back of the laser range finder does not
touch the rear stop of the horizontal shelf, there
will be observational errors.
13. Use the laser range finder to position SCT 815 at the
precise specified distance from the front of the vehi‐
cle.

The position of SCT 815 is correct when the laser
range finder reading matches the specification
from the brief instructions.
---
4.4 Aligning SCT 815 with the vehicle's
longitudinal center plane
1. Attach the line laser
(1)
to the mount for the line la‐
ser
(4)
, and use the retaining cable to secure it.
2. Use the positioning feet
(3)
to level SCT 815 in ac‐
cordance with the spirit level on the mount for the
line laser
(2)
.
en | 18 | SCT 815