
1 689 989 475 | 2020-05-01
Robert Bosch GmbH
1
......................................
1.1
Symbols used in the documentation
1.2
1.3
...............................................
1.4
.................................
1.5
...............................................
1.6
2
..................................
2.1
..............................................
2.2
.......................................
2.3
......................................
2.4
..............................................
2.5
2.6
...............................
3
................................
3.1
...................................
3.2
Checking the accuracy of the inclination meas‐
urement (before each calibration)
4
..................................................
4.1
Positioning SCT 815 for radar sensor calibra‐
tion
.............................................................
4.2
Attaching the line laser to SCT 815
4.3
Adjusting the distance between SCT 815 and
the vehicle
..................................................
4.4
Aligning SCT 815 with the vehicle's longitudi‐
nal center plane
.........................................
4.5
Adjusting the height of the prismatic reflec‐
tor
..............................................................
4.5.1
Adjusting the height of the prismatic reflector
4.5.2
Adjusting the height of the prismatic reflector
using the manufacturer's badge or the front ra‐
dar sensor
..................................................
4.6
Setting the offset (up to 25 cm) from the vehi‐
cle's longitudinal center plane
4.7
Setting the offset (25 cm and above) from the
vehicle's longitudinal center plane
5
..............................................
5.1
.....................................................
5.2
................................................
5.3
5.4
Checking the screws (semi-annually)
5.5
Check and calibrate laser rangefinder
6
......................................
6.1
......................................
6.2
.....................................................
7
...........................................
7.1
..............................
1.
User instructions
---Separator---
1.1
Symbols used in the documentation
Warning of possible physical damage to the
component or product or of environmental
pollution.
---Separator---
Practical hints, recommendation or reference
to other information.
---Separator---
Warning of danger for the operator during
subsequent procedures.
---Separator---
Single-step procedure.
---Separator---
Optional step.
---Separator---
Result of a procedure.
---Separator---
Reference to a figure. Example:
12(2)
means figure 12, item 2.
---Separator---
Reference to a page.
---Separator---
1.2
Warnings in the documentation
Warning notices warn of dangers to the user or people
in the vicinity. Warnings also indicate the type, source
and consequences of the danger as well as preventive
action.
Warning notices have the following structure:
Signal word
Warning
symbol
Type, source and consequences of the
danger.
Actions and instructions to prevent the
danger.
The signal word indicates the likelihood of occurrence
and the severity of the danger in the event of non-ob‐
servance:
Signal word Likelihood of occur‐
rence
Severity of danger with
non-observance
DANGER
Immediate threat of
danger
Death or severe injury
WARNING
Possible impending
danger
Death or severe injury
CAUTION
Possible dangerous sit‐
uation
Minor injury
---Separator---
1.3
Target group
The product may only be used by trained and instruc‐
ted personnel. Apprentices or personnel undergoing
training or instruction may use the product only under
the continual supervision of an experienced person.
Children must be supervised to ensure that they do not
play with the product.
---Separator---
1.4
Warranty and liability
No modifications may be carried out on our products.
Our products may only be used with genuine accesso‐
ries and genuine spare parts. Otherwise, all warranty
claims will be rendered null and void.
---Separator---
SCT 815 | 13 | en
Содержание SCT 815
Страница 271: ......