RE 90300-B/2021-01-19, Bosch Rexroth AG
Disposal |
Axial piston units
51
/64
12 Disposal
Careless disposal of the axial piston unit, the hydraulic fluid and the packaging
material can result in environmental pollution.
Observe the following when disposing of the axial piston unit:
1.
Completely drain the axial piston unit.
2.
Dispose of the axial piston unit and packaging material in accordance with the
regulations in your country.
3.
Dispose of the hydraulic fluid in accordance with the regulations of your
country. Also observe the applicable safety data sheet for the hydraulic fluid.
4.
Install the axial piston unit into its constituent parts for proper recycling.
5.
For example, separate the parts into:
– Castings
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit and/or its assembled parts. This also includes
changing the wiring or software.
Changes to settings on the customer side should only be made using the
product-specific setting instructions.
The warranty from Bosch Rexroth only applies to the configuration as delivered.
Entitlement to warranty cover will be rendered void in case of conversion,
extension or a software modification.
Setting screws are protected against unauthorized adjustment by tamper-proof
caps. Removing the safety caps and/or adjusting the setting screws will render
the warranty void. If you need to change the settings, please contact your local
contact person; you can find their contact information at
www.boschrexroth.com/addresses
