RE 90300-B/2021-01-19, Bosch Rexroth AG
Safety instructions |
Axial piston units
11
/64
2 Safety instructions
2.1 About this chapter
The axial piston unit has been manufactured to generally accepted engineering
standards. There is still, however, a risk of personal injury or property damage if this
chapter and the safety instructions in this documentation are not observed.
▶ Read this documentation completely and thoroughly before working with the axial
piston unit.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when you pass the axial piston unit
on to third parties.
2.2 Intended use
Axial piston units are hydraulic components, meaning that in their application
area they are classified neither as complete nor as partly completed machinery as
defined in the EC Machinery Directive 2006/42/EC. The component is exclusively
intended to form partly completed machinery or complete machinery together with
other components. The component should only be commissioned after it has been
installed in the machine/system for which it is intended, and the safety of the entire
system has been established in accordance with the Machinery Directive.
This product is intended for the following use:
Product
Use
Axial piston pump in open
circuit
The axial piston unit is only approved as a pump for hydrostatic
drives in an open circuit.
Axial piston pump in closed
circuit
The axial piston unit is only approved as a pump for hydrostatic
drives in closed circuit.
Plastic feed pump
The axial piston unit is only approved for pumping polyurethane
components (polyol and isocynate).
Axial piston motor
The axial piston unit is only approved as a hydraulic motor in
hydrostatic drives.
▶ Observe the technical data, application and operating conditions and
performance limits as specified in the product-specific data sheet and in the
order confirmation. Information about approved hydraulic fluids can be found in
the product-specific data sheet.
The axial piston unit is only intended for commercial use and not for private use.
Intended use includes having fully read and understood this documentation,
especially chapter 2 "Safety instructions" on page 11.
