Bosch REXROTH MS2E Скачать руководство пользователя

Страница: 46 / 82

MS2E plug connector mechanical hazard

Plug connector

Impact strength of plug connectors satisfies low degree of me‐

chanical hazard, in the case of impact from

top

Side

below

M17 Encoder

yes, with assembled plug connector pro‐

tective cover SUP-M02-MS2E

M23 Hybrid

yes, with assembled plug connector pro‐

tective cover SUP-M01-MS2E

M40 Power

yes

●

During machine construction avoid possible impacts onto the electric

connections and plug connectors.

●

Do a risk evaluation about mechanical hazard for connectors on motors

and cables in the machine due to impacts from different directions.

●

If necessary, assemble the plug connector protective cover SUP-M0x-

MS2E.

●

Avoid impacts onto the plug connectors if there is a higher degree of

mechanical danger due to additional devices or design changes to the

machine.

Danger of explosion due to mechanical haz‐

ard of plug connectors.

WARNING

Provide arrangements to protect the plug connector mechanically (e.g. cov‐

ers, protective plates, ...).

To protect the plug connector, Rexroth offers plug connector protective cover

as an optional accessory, see

chapter 7.2.7 "Plug connector protective cover

" on page 46

Maintenance and repair

Maintenance and repair of motors must exclusively be done by Rexroth serv‐

ice.

Electrostatic charge

Avoid electrostatic charge resulting in propagating brush discharges
The type plate and the warning labels of MS2E motors are made of plastic

foil and limited conducting (disruptive voltage > 4 kV, see EN 60079-0). Fol‐

low the instructions below.

Danger of explosion due to propagating

brush discharges

WARNING

Do a risk evaluation about occurance of highly charge-generating processes

with the danger of propagating brush discharges.
Avoid propagating brush discharges or provide measures to avoid propagat‐

ing brush discharges.

See section

chapter 2.4.4 "Protection against ignitable electrostatic dis‐

charge" on page 6

30/65

Explosion protection

MS2E Synchronous Servomotors acc. to ATEX Directive

2014/34/EU

Bosch Rexroth AG R911387136_Edition 02

Содержание REXROTH MS2E



















































































Результаты поиска

Содержание REXROTH MS2E

Отзывы:

Похожие инструкции для REXROTH MS2E

Бренды по названию

Популярные бренды

Bosch REXROTH MS2E, Руководство по эксплуатации

Результаты поиска

Содержание REXROTH MS2E

Отзывы:

Похожие инструкции для REXROTH MS2E

Бренды по названию

Популярные бренды