Bosch REXROTH MS2E Скачать руководство пользователя

Страница: 20 / 82

priate installation (for example: physical separation of signal and power ca‐

bles, using shielded cables, ...). The EMC instructions of the converter manu‐

facturer must be observed.
The motors must be left in their original state. It is not allowed to do any con‐

structional modifications. In the case of contravention, applicability according

to intended use will expire (e.g. safety technique or ATEX conformity...).
The machine may not be commissioned before conformity with these direc‐

tives has been confirmed.

2.1.2

Unintended use

Any use of the MS2E motors outside of the specified fields of application or

under operating conditions and technical data other than those specified in

this documentation is considered to be "inappropriate use".
Direct operation on the three-phase network is forbidden.

2.2

Qualification of personnel

For the purpose of this manual, qualified personnel means persons who are

familiar with transporting, installing, mounting, commissioning and operating

the components of the electrical drive and control system and the associated

hazards and have an appropriate qualification for their job.
Within the meaning of explosion protection, the plant application, selection of

devices and their construction must be made by persons whose education

contained instruction in several ignition protection types and installation tech‐

niques, correct regulations and rules as well as general principles of zoning.

The person must be competent to do the mode of work (EN 60079-14). The

personnel must be trained in regular intervals.
All persons working on, with or in the vicinity of an electrical system must be

informed of the relevant safety requirements, safety guidelines and internal

instructions.

2.3

General safety instructions

Do not install or operate motors or components of the electric drive and con‐

trol system before you have not carefully read all delivered documents.
Please observe the particular applicable national, local and system-specific

regulations, the safety instructions in the documentation and the warning and

informative labels on the motors.
Improper use of the motors and failure to follow the safety instructions in this

document may result in material damage, personal injury, electric shock or, in

extreme cases, to death!
In the case of damage due to non-observance of the safety notes, Bosch

Rexroth assumes no liability.
Applications for functional safety are only allowed if the motors have the SI-

sign on the rating plate.

2.4

Product- and technology-dependent safety instructions

2.4.1

Protection from danger of explosion

Product use only in hazardous areas according to the specified labeling on

the product

4/65

Safety instructions

MS2E Synchronous Servomotors acc. to ATEX Directive

2014/34/EU

Bosch Rexroth AG R911387136_Edition 02

Содержание REXROTH MS2E



















































































Результаты поиска

Содержание REXROTH MS2E

Отзывы:

Похожие инструкции для REXROTH MS2E

Бренды по названию

Популярные бренды

Bosch REXROTH MS2E, Руководство по эксплуатации

Результаты поиска

Содержание REXROTH MS2E

Отзывы:

Похожие инструкции для REXROTH MS2E

Бренды по названию

Популярные бренды