Bosch REXROTH IndraControl VEH 30.2, Руководство по планированию проекта

Страница: 28 / 112

Prescribed external protec‐
tion
Fusible cut-out, 2 A time-lag
B10d value B10d: 250.000
Exclusion of failure at <6050 switching cycles
Tab.4-3: Technical data, stop button
4.4 Enabling Device
Design
3-stage enabling device 1) , 2-channel, electrically iso‐
lated
Nominal voltage DC 24 V / AC 30 V protective extra low voltage
(PELV)
Nominal current* 2 A = or 2.3 A~
Current carrying capacity of the output contacts is limi‐
ted by connected cable
Prescribed external protec‐
tion
Fusible cut-out, 2 A time-lag
Switching cycles >200000 for enabling range,
>100000 for panic position
Control category Can be used in safety-related controls up to category
4, DIN EN 954-1 (if required with additional monitoring
modules).
Can be used in safety-related controls up to category
3 according to EN ISO 13849-1
B10d value B10d: 100.000
Tab.4-4: Technical data, enabling device
4.5 Connection Module IndraControl VAC 30.2
Connections ● 1 x Ethernet connection (RJ 45, 10/100 Base-T)
● Stop button
● Isolated contact "Terminal connected"
● Enabling device
● Voltage supply 24 V (see tab. 4-1 "Technical da‐
ta, IndraControl VEH 30.2" on page 25 )
● 17-pin fine-thread flange to the hand-held termi‐
nal
Jumpering the stop pushbut‐
ton circuit with unplugged
hand-held terminal
Automatic jumpering of relay contacts
Prescribed external protec‐
tion
Fusible cut-out, 2 A time-lag
1)
Lines must be protected against short-circuits and cross-circuits by the installation!
Bosch Rexroth AG DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal
26/109
Technical Data