manualshive.com logo in svg

Bosch REXROTH IndraControl VEH 30.2, Руководство по планированию проекта

Поделиться
Скачать
Bosch REXROTH IndraControl VEH 30.2 Скачать руководство пользователя страница 15

Bosch Rexroth disclaims as manufacturer any warranty, liability or

damages occurring due to inappropriate use of the products. Fur‐

thermore,  Bosch  Rexroth  is  not  paying  any  compensation;  the

user is responsible for any risks resulting from inappropriate use

of the products.

Before  using  Bosch  Rexroth  products,  the  following  requirements  must  be

met to ensure appropriate use of the products:
●

Anyone  handling  one  of  the  Rexroth  products  in  any  way  has  to  read

and understand the respective safety-related guidelines as well as the

instructions on appropriate use.

●

Hardware products have to remain in their original state, i. e. no modifi‐

cation regarding the design is allowed. Software products must not be

decompiled and their source codes must not be modified.

●

Damaged or faulty products must not be implemented or put into opera‐

tion.

●

It  must  be  ensured  that  the  products  are  installed  as  specified  in  the

documentation.

2.4.2 

Areas of Use and Application

The IndraControl VEH 30.2 Hand-Held Terminal is a PC-based operating and

visualization  device  that  can  also  fulfill  control  functionalities,  depending  on

the application or configuration.

Danger of destruction of the device if not ex‐

pressly  stated  accessories,  add-on  compo‐

nents  and  other  components,  cables,  con‐

duits, software and firmware is used.

NOTICE

The  IndraControl  VEH  30.2  Hand-Held  Terminals  may  exclusively  be  used

with the accessories and add-on components specified in this documentation.

Components not named expressly mentioned must neither be mounted nor

connected. The same applies to cables and conduits.
The products may only be operated with the expressly stated configurations

and  component  combinations  as  well  as  with  the  software  and  firmware

which given and specified in the respective functional description.

The  IndraControl  VEH  30.2  Hand-Held  Terminal  was  developed  for  control

tasks.
Typical areas of application of the IndraControl VEH 30.2 Hand-Held Termi‐

nal are:
●

Handling systems and assembly systems

●

Packaging and food processing machines

●

Printing machines and paper converting machines

●

Machine tools

The devices of the IndraControl VEH 30.2 design may only be operated un‐

der the assembly conditions and installation conditions, in the specified posi‐

tion of application and under the specified ambient conditions (temperature,

degree of protection, humidity, EMC etc.) given in this documentation.

DOK-SUPPL*-VEH*30.2***-PR03-EN-P  
Rexroth IndraControl VEH 30.2 Hand-Held Terminal 

Bosch Rexroth AG

13/109

Important Instructions on Use, Target Group and Purpose of the Document

Содержание REXROTH IndraControl VEH 30.2

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды