Bosch Rexroth IndraControl VDP 08.3, Руководство пользователя, Страница: 68 / 84

Vin A voltage supply of 24 V is applied
XSER1 and XVID1 Touch screen operation is activated on the VDP
08.3/40.3 no. 1.
XSER2 and XVID2 Operation is activated on the VDP 08.3/40.3 no.2.
Fig.10-14: Light-emitting diodes at the Y-Repeater
10.6 Connection of the Y-Repeater
10.6.1 Connection of the Y-Repeater (block diagram)
Fig.10-15: Connection of the Y-repeater
10.6.2 Pin Assignment on the Y-Repeater
Fig.10-16: Pin assignment of the Y-repeater
10.6.3 Connection of Two Operator Displays via the Y-Repeater
To connect two operator displays to a control cabinet PC, the Y-repeater is
switched between the control cabinet PC and the both operator displays. As
the screen signals are transmitted to both operator displays, data can only be
entered with the active operator display. Which of the two operator displays can
be used as active operator display to operate the control cabinet PC, is to be
Bosch Rexroth AG DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
66/81
Y-Repeater