Bosch Rexroth CytroMotion, Руководство по эксплуатации

Страница: 12 / 60

12 / 60
Self-contained axis
Product-specific safety instructions
Bosch Rexroth AG RE62290-B, 05.22
WARNING
High electrical voltage above 50 V! Danger to life and risk
of injury caused by electric shock.
−
De-energize the self-contained axis before installa-
tion, pulling and connecting connectors and all other
work.
−
Secure the electrical equipment against restarting.
Verify that there is no voltage using tested measuring
equipment.
−
Before switch on, check whether the protective
grounding conductor of all electric devices is firmly
connected according to the connection diagram.
−
Measure the electrical voltage of live parts before
beginning the work in order to avoid hazards caused
by contact.
−
Do not touch the electrical connection points of the
components if the system is switched on.
WARNING
Danger due to pressurized hydraulic fluid! Danger of poi-
soning and risk of injury (e.g. eye injuries, skin lesions,
poisoning due to inhalation and ingestion)
−
Check the piping for wear and damages before any
commissioning.
−
Use personal protective equipment (e.g. safety gog-
gles, protective gloves, suitable working clothes,
safety shoes, etc.).
−
If nevertheless hydraulic fluid comes into contact
with the eyes or penetrates the skin, please consult
a doctor immediately.
−
When dealing with hydraulic fluids, it is imperative to
observe the safety instructions of the hydraulic fluid
manufacturer.
WARNING
Hot surfaces! Risk of burning. The self-contained axis
heats up considerably during operation. Individual com-
ponents of the self-contained axis can get so hot during
operation that they may cause burns.
−
Allow the self-contained axis to cool down sufficiently
before touching it.
−
Wear heat-resistant protective clothing, e.g. gloves.
WARNING
Flammable hydraulic fluid! Risk of fire.
−
Keep open fire and ignition sources away from the
self-contained axis.
−
Ensure sufficient ventilation.
−
Do not carry out welding works at or in the vicinity of
pressurized self-contained axes.
WARNING
Danger due to pressurized self-contained axes! Risk of
injury! Severe injury when working at systems that have
not been stopped! Damage to property! Even once the
self-contained axis has been disconnected from the elec-
trical power supply, the system is still pressurized (accu-
mulator pressure max. 10 bar)!
−
Observe the specifications of the system manufac-
turer and the system end-user!
−
Do not disconnect lines, connections or components
as long as the self-contained axis is under pressure.