Bosch Rexroth CytroMotion, Руководство по эксплуатации

Страница: 6 / 60

6 / 60
Self-contained axis
Representation of information
Bosch Rexroth AG RE62290-B, 05.22
WARNING
Type and source of danger! or consequences of non-com-
pliance
−
Hazard avoidance measures
●
Warning sign: draws attention to the danger
●
Signal word: identifies the degree of danger
●
Type and source of danger!: specifies the type and source of danger
●
Consequences: describes the consequences of non-compliance
●
Precautions: specifies how the danger can be prevented
DANGER
In the case of non-compliance with these safety instruc-
tions, death or severe injury will occur.
WARNING
In the case of non-compliance with these safety instruc-
tions, death or severe injury may occur.
CAUTION
In the case of non-compliance with these safety instruc-
tions, minor or moderate injury may occur.
NOTICE
In the case of non-compliance with these safety instruc-
tions, damage to property may occur.
Designations
The following designations are used in this documentation:
Table 1: Designations
Designation Meaning
CytroMotion Self-contained axis
Conventions for symbols
The following symbols are used in these operating instructions and/or on the
linear drive. The used symbols have the meanings described below:
Table 2: Warnings according to DIN EN ISO 7010
Designation Meaning
Warning: dangerous, electrical voltage
Warning: hot surface
Warning: suspended load
Warning: slip hazard
Abbreviations
The following designations are used in this documentation:
Table 3: Abbreviations
Designation Meaning
4Q 4 quadrant operation
EN European Standard
EC European Community
EU European Union
Ex Explosion protection
IEC
International Electrotechnical Commis-
sion