Bosch Rexroth CytroMotion, Руководство по эксплуатации

Страница: 51 / 60

51 / 60
Self-contained axis
How to proceed for troubleshooting
Bosch Rexroth AG RE62290-B, 05.22
14 Troubleshooting
14.1 General information
WARNING
Dangerous movement! In the case of fault, dangerous
movements of the self-contained axis may occur. This
means that there is a risk of injury.
−
Keep out of the range of motion of the self-contained
axis and other moving system parts during trouble-
shooting.
−
Prevent the unintended access of persons (e.g. by
blocking, covering).
−
Before accessing or entering the danger zone, bring
the self-contained axis safely to a standstill.
●
Before starting work at live parts: Disconnect the self-contained axis at
the system side from the supply voltages and secure the shut-down device
against unintended restarting.
●
Check if the voltage has fallen below 50 V before touching live parts!
14.2 How to proceed for troubleshooting
●
The troubleshooting may only be performed by Bosch Rexroth or by author-
ized and trained personnel from a specialist company authorized by Bosch
Rexroth. Furthermore, training on self-contained axes is necessary.
Bosch Rexroth offers measures supporting training in specific fields. An over-
view over the training contents can be found online at:
⮫
http://www.boschrex-
roth.com
●
Always work systematically and purposefully, even when under time pres-
sure. Random, thoughtless disassembly and changing of settings might
result in the inability to determine the original cause of error.
●
First get a general idea of how your product works in conjunction with the
overall system.
●
Try to find out whether the product has functioned properly in conjunction
with the overall system before the error occurred first.
●
Try to determine any changes of the overall system into which the product is
integrated:
–
Were there any changes to the product's application conditions or area of
application?
–
Have modifications (e.g. refittings) or have repairs been carried out at
the overall system (machine/system, electrical systems, control) or at the
product? If yes: What were they?
–
Was the product or machine used as intended?
–
How did the fault become apparent?
●
Try to get a clear idea of the cause of error. If necessary, ask the actual
(machine) operator.
●
If the occurred error could not be remedied, please contact one of the
contact addresses provided at
⮫
http://www.boschrexroth.com .