Bosch rexroth CytroForce-M Скачать руководство пользователя страница 64

Страница: 64 / 85

64 / 85

Servo-hydraulic actuator
Maintenance and inspection schedule

Bosch Rexroth AG

RE62270-B, 01.21

−

Inspect the servo-hydraulic actuator continuously for abnormalities and

changes. This refers, amongst others, to leakage, changed noise emission,

loose fittings/connections, unusual generation of heat, damage to cables,

etc.

−

In order to prevent electrostatic charging, remove dust accumulations with

a damp cloth.

−

An extended visual inspection includes checking the mounting elements and

fittings for tight seat. This must be carried out when the system has been

switched off, depressurized and has cooled down.

Maintenance indication by application software
The following parameters are continuously monitored by the application soft-

ware PFC:
Table 6: Monitoring by application software

What?

Remarks

Checking the operating temperature

Continuous monitoring by application

software If these “warning and error

messages” appear repeatedly, please

contact Bosch Rexroth Service.

Checking the accumulator pressure

Checking the filter element (for clog-

ging)

Inspection/testing in case of repeated “warning or error messages"
Table 7: Inspection/testing in case of repeated “warning or error messages"

What?

Remarks

Checking the gas pressure of the

accumulator

Maintenance work my only be carried

out by Bosch Rexroth or authorized

qualified personnel, see

⮫

Chapter 2.4 “Qualification of per-

sonnel” on page 12.

Replacing the filter element

Taking oil samples, topping up oil
For maintenance and repair work we offer a comprehensive selection of service

tools (e.g. maintenance kit for servo-hydraulic actuators). If required, contact

Bosch Rexroth Service.
The “maintenance kit for servo-hydraulic actuators (SY-SHA)" assumes the task

of refilling the hydraulic fluid taken for samples. It is not intended for carrying

out complete hydraulic fluid changes or for complete bleeding of the servo-

hydraulic actuator. Beachten Sie die Operating instructions " Maintenance kit

for servo-hydraulic actuators SY-SHA), R. 62249-B, see also

⮫

Chapter 1.2

“Required and supplementary documentation” on page 5.

Содержание rexroth CytroForce-M






















































































Результаты поиска

Содержание rexroth CytroForce-M

Отзывы:

Похожие инструкции для rexroth CytroForce-M

Бренды по названию

Популярные бренды

Bosch rexroth CytroForce-M, Руководство по эксплуатации

Результаты поиска

Содержание rexroth CytroForce-M

Отзывы:

Похожие инструкции для rexroth CytroForce-M

Бренды по названию

Популярные бренды