Bosch rexroth CytroForce-M Скачать руководство пользователя страница 13

Страница: 13 / 85

13 / 85

Servo-hydraulic actuator

Product-specific safety instructions

Bosch Rexroth AG

RE62270-B, 01.21

●

Exclusively use Rexroth products in technically perfect condition.

●

Observe all notices on the product.

●

Persons who install, commission, operate, demount or maintain Rexroth

products must not consume any alcohol, drugs or pharmaceuticals that may

affect their ability to respond.

●

Only use original Bosch Rexroth accessories and spare parts in order to pre-

vent any hazard to persons due to unsuitable spare parts.

●

Comply with the technical data and ambient conditions specified in the

product documentation.

●

The installation or use of inappropriate products in safety-relevant applica-

tions could result in unintended operating states in the application which in

turn could cause personal injuries and/or damage to property. Therefore,

only use a product for safety-relevant applications if this use is expressly

specified and permitted in the documentation of the product, e.g. in explo-

sion protection zones or in safety-related parts of control systems (func-

tional safety).

●

Do not commission the product until you can be sure that the end product

(for example a machine or system) in which the Bosch Rexroth products are

installed complies with the country-specific provisions, safety regulations

and standards of the application.

2.6

Product-specific safety instructions

The following safety instructions apply to chapters 6 to 14.

WARNING

Exceedance of the maximum temperatures! Using the

servo-hydraulic actuator outside the approved tempera-

ture ranges may lead to malfunction or increased surface

temperatures.
Only use the servo-hydraulic actuator within the specified

ambient and hydraulic fluid temperature range.

WARNING

Risk of damage to property and personal injuries!
Any modifications to or work on the servo-hydraulic

actuator, e.g. changing of pipework, opening of fittings

(except for the fittings provided at the servo-hydraulic

actuator for measuring purposes), which are not

described in these operating instructions or were not

agreed with Bosch Rexroth, can lead to personal injury

and damage to property!

−

You may only carry out the work on the servo-

hydraulic actuator that is described in these oper-

ating instructions.

−

Any modifications may exclusively be carried out by

Bosch Rexroth or by authorized and trained personnel

of a specialized company that was authorized by

Bosch Rexroth.

−

The mounting and installation instructions have to be

strictly observed.

WARNING

Non-compliance with functional safety! In case of

mechanical and electrical faults, e.g. failure of energy

supply, persons may be caught by the system, kicked

away or crushed.
When setting up your circuit, observe the requirements

for functional safety according to ISO 13849 or IEC

61508.

Содержание rexroth CytroForce-M






















































































Результаты поиска

Содержание rexroth CytroForce-M

Отзывы:

Похожие инструкции для rexroth CytroForce-M

Бренды по названию

Популярные бренды

Bosch rexroth CytroForce-M, Руководство по эксплуатации

Результаты поиска

Содержание rexroth CytroForce-M

Отзывы:

Похожие инструкции для rexroth CytroForce-M

Бренды по названию

Популярные бренды