6/64
About this documentation
Bosch Rexroth AG
, Series 10 A10VG, RE 92750-01-B/06.2018
Table 1: Required and supplementary documentation
Title
Document number Document type
Information on the use of hydrostatic drives at low temperatures
Contains additional information on the use of Rexroth axial piston units at low
temperatures.
90300-03-B
Manual
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
90312
Data sheet
1.3 Representation of information
Standardized safety instructions, symbols, terms and abbreviations are used
throughout this documentation so that you can work quickly and safely with your
product. For clarification, they are explained in the sections below.
1.3.1 Safety instructions
This documentation contains safety instructions in chapter 2.6 “Product-specific
safety instructions” on page 12 and in chapter 3 “General notices regarding
property and product damage” on page 16, as well as before a sequence of
actions or an instruction for action involving a risk of personal injury or property
damage. Always follow the instructions on avoiding the dangers associated with the
use of this product.
Safety instructions are set out as follows:
SIGnAl wORD
Type and source of danger!
Consequences of noncompliance
▶
Measures to prevent danger
• warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes what occurs if safety instructions are disregarded
• Precautions: states how the danger can be avoided
Table 2: Danger classes as defined in AnSI Z535.6
warning sign, signal word
Meaning
DAnGER
Identifies a dangerous situation that will result in death or
serious injury if it is not avoided.
wARnInG
Identifies a dangerous situation that may result in death or
serious injury if it is not avoided.
CAUTIOn
Identifies a dangerous situation that may result in minor to
moderate injury if it is not avoided.
NOTICE
Property damage: The product or surrounding area may be
damaged.
