manualshive.com logo in svg

Bosch Rexroth 0532VAW, Руководство по эксплуатации

Поделиться
Скачать
Bosch Rexroth 0532VAW Скачать руководство пользователя страница 49

 Operation 49/64

 

RE 50129-B/02.19, Accumulator shut-off block type ABZSS, 0532VAW, 

Bosch Rexroth AG

  

9  Operation

 CAUTION

Leakage of hydraulic fluid under high pressure due to faulty assembly of the 
accumulator shut-off block!

Risk of injury! Damage to property! 

 

▶

Before commissioning, make sure that the accumulator shut-off blocks is 
installed by expert personnel without tension stress according to chapter 2.4 
"Qualification of personnel".

 

▶

Ensure that the tightening torques required by the system are observed.

During operation of the accumulator shut-off block, observe the following points:

 

▶

Operate the accumulator shut-off blocks only in compliance with the admissible 
data specified in data sheet 50131, accumulator shut-off block type ABZSS, and 
50128, accumulator shut-off block type 0532VAW, see chapter 1.2 "Required and 
amending documentation".

 

▶

Operate the accumulator shut-off block only in good order and condition.

 

▶

Make sure that adjustment devices at components are only operated by 
authorized specialist personnel according to the intended use of the hydraulic 
system.

To ensure long and reliable operation of the accumulator shut-off block, 
Bosch Rexroth recommends regular check of the hydraulic system and the 
accumulator shut-off block according to the following points:

 

▶

Continuous monitoring of noise, vibration and temperature.

 

▶

Check of the hydraulic fluid in the tank for bubble and foam formation at the 
surface after some operating time.

Changes in operating speeds, temperatures, increasing noises or power 
consumption are an indication of wear or damage to the accumulator shut-off 
block or the machine/system. 

Содержание Rexroth 0532VAW

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды