Assembly 43/64
RE 50129-B/02.19, Accumulator shut-off block type ABZSS, 0532VAW,
Bosch Rexroth AG
7.5 Accumulator shut-off block assembly
▶
Attach the accumulator shut-off block to the hydraulic accumulator prior to
assembly in the hydraulic system.
7.5.1 Accumulator shut-off block assembly at hydraulic accumulator
WARNING
Falling of the accumulator shut-off block and/or the hydraulic accumulator during
assembly
Danger to life! Risk of injury! Damage to property!
▶
Use lifting gear with sufficient lifting capacity to accumulator shut-off blocks and
hydraulic accumulators with a weight > 15 kg.
▶
Use lifting straps or lifting slings as attachment devices.
▶
Ensure that the accumulator shut-off block / hydraulic accumulator is securely
fixed at the lifting strap/sling in the intended position.
▶
Guide the accumulator shut-off block / hydraulic accumulator by hand for fine
positioning and to prevent vibrations.
▶
Never step or reach below suspended loads.
▶
Use your personal protective equipment, e.g. safety shoes.
▶
Carefully position the accumulator shut-off block or the hydraulic accumulator
on the contact surface in order not to damage it.
▶
Make sure that the hydraulic accumulator is positioned safely and secured
against unintended rolling away, overturning or falling.
▶
Use an accumulator adapter in form of a flange connection or a double nipple as
connection element between the accumulator shut-off block and the hydraulic
accumulator.
Accumulator adapters are available as accessories. For further information
accessories, refer to data sheets 50128 and 50131, see chapter 1.2 "Required
and amending documentation".
▶
Attach the accumulator adapter according to the specifications of the respective
manufacturer.
