Transport and storage 35/64
RE 50129-B/02.19, Accumulator shut-off block type ABZSS, 0532VAW,
Bosch Rexroth AG
6 Transport and storage
▶
Always comply with the required environmental conditions with regards to
transport and storage, see chapter 6.3 "Accumulator shut-off block storage".
For notices on unpacking, refer to chapter 7.1 "Unpacking".
6.1 Accumulator shut-off block transport
WARNING
Falling or dropping of an unsecured accumulator shut-off block due to incorrect
transport!
Risk of injury! Danger of crushing! Damage to property!
▶
Use the original packaging of the accumulator shut-off block for transport.
▶
Do not transport accumulator shut-off block with a weight over 15 kg by hand.
▶
Use suitable lifting gear for transport of accumulator shut-off blocks with a
weight over 15 kg.
▶
Transport and secure the accumulator shut-off block at the intended eyebolts
and not at parts with little stability, e.g. valves.
▶
Use lifting straps or lifting slings as attachment devices for transport.
▶
Make sure that the lifting gear lifting capacity is sufficient in order to safely bear
the weight of the accumulator shut-off block.
▶
Provide for a stable position during transport to the place of installation.
▶
Never step or reach below suspended loads.
▶
Use your personal protective equipment, e.g. safety shoes.
▶
Carefully position the accumulator shut-off block on the contact surface in order
not to damage it.
▶
Position the accumulator shut-off block on a level bearing surface.
▶
Before transport, close all openings with the supplied protective caps/cover caps
in order to prevent dirt or humidity from penetrating the accumulator shut-off
block.
In the following, transport of the accumulator shut-off block without attached
hydraulic accumulator is described.
Depending on the weight and transport duration, there are the following transport
possibilities:
• Transport by hand
• Transport using lifting gear (e.g. lifting strap, lifting sling)
Close openings
Transport
