background image

Cleaning    

en

43

Hob

Clean the hob each time you use it. This will prevent 

food remnants from becoming burned on. Do not clean 

the hob until the residual heat indicator has gone out. 

Remove boiled-over liquids immediately and do not 

allow any food remains to dry on.
Clean the hob with a damp dish cloth and dry it with a 

cloth or towel to prevent limescale build-up.
Stubborn dirt is best removed with a glass scraper or 

glass ceramic cleaner (available from retailers). Follow 

the manufacturer's instructions.
You can obtain a suitable glass scraper (article no. 

00087670) from our after-sales service or through our 

online shop.
Using a special sponge for cleaning glass-ceramic 

hobs achieves great cleaning results.

Ventilation system

The filter must be regularly cleaned or replaced in order 

to guarantee efficient filtration of odours and grease.

Metal grease filter

The metal grease filters should be cleaned every 30 

operating hours or at least once a month.

:

Warning – Risk of fire! 

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least once a month.

Never operate the appliance without the grease filter.

Activated charcoal filters

The activated charcoal filter should be replaced 

regularly. The saturation indicator on your appliance will 

tell you how frequently this needs to be done.

Saturation display

If the metal grease filter or activated charcoal filter 

becomes saturated, a signal will sound once the 

appliance has been switched off.
The following symbols will light up in the display panel:

Metal grease filter:

 

”‚

 

 lights up

Activated charcoal filter:

 

 

‚‚

 lights up

Metal grease filter and activated charcoal filter:

 

 

‚‹

 and 

”‚‚

 light up alternately

Do not wait any longer to clean the metal grease filter or 

replace the activated charcoal filter.

Changing the activated charcoal filter (only in 

circulating-air mode)

Activated charcoal filters trap the odour-causing 

compounds in cooking smells. They are only used for 

circulating-air mode.

Notes

The activated charcoal filter is not included with the 

appliance.The activated charcoal filter (article 

no. HEZ381700) is available from specialist 

retailers, from our after-sales service or from our 

online shop.

The activated charcoal filter cannot be cleaned or 

reactivated.

Only use genuine replacement filters. This will 

ensure that the appliance performs optimally.

1.

Unlock all of the closing elements on the drawer in 

the flat duct of the fitted unit.

2.

Open the drawer in the flat duct and remove the 

activated charcoal filter.

3.

Insert the new activated charcoal filter.

4.

Close the drawer in the flat duct and lock all of the 

closing elements.

Note: 

Make sure that all of the closing elements 

have been locked correctly. Otherwise noises may 

be generated and the power of the ventilation 

system may be reduced.

Содержание PXX8 D3.E Series





















































Отзывы: