Bosch PXX8 D3.E Series Скачать руководство пользователя страница 14

Страница: 14 / 52

Before using for the first time

Before using for the first

time

Before us

ing for t

he first

time

Please read the following information before using the

appliance for the first time:
Clean the appliance and all accessory parts thoroughly.
Before you can use your new appliance, you must apply

certain settings.

Initial use

Note:

When it is delivered, the appliance is preset to air

recirculation mode.

Possible settings:

■

In air recirculation mode, if

’‚ˆ

is displayed, the

value

‹

(factory setting) is set.

■

In air extraction mode, if

’‚ˆ

is displayed, the value

‚

is set.

Switching over the display for exhaust air mode

For air extraction mode, the electronic controller's

display must be switched accordingly to the basic

settings.

Check whether the appliance is connected and

switched off.

Switch on the appliance.

Within ten seconds, touch and hold the

symbol for

approximately four seconds.

The first four displays provide product information.

Touch the settings area to view the individual

displays.

Touching the

symbol again takes you to the basic

settings.

™‚

and

‹

light up as a preset in the displays.

Touch the

symbol repeatedly until the

™‚ˆ

displayed.

Select the setting

‚

in the control panel.

Touch the

symbol for at least four seconds.

The settings are saved.

Use the main switch in order to exit the basic

settings.

The display of the electronic controller is switched to air

extraction mode.

Switching over the display for circulating-air mode

When it is delivered, the appliance is set to air

recirculation mode.
If the settings have been changed, proceed as follows

to set the display for the electronic controller in the

basic settings for air recirculation mode.

Check whether the appliance is connected and

switched off.

Switch on the appliance.

Within ten seconds, touch and hold the

symbol for

approximately four seconds.

The first four displays provide product information.

Touch the settings area to view the individual

displays.

Touching the

symbol again takes you to the basic

settings.

™‚

and

‹

light up as a preset in the displays.

Touch the

symbol repeatedly until the

™‚ˆ

displayed.

Select the setting

‹

in the control panel.

Product information

Display screen

After-sales service index (ASSI)

‹‚

Production number

”š

Production number 1

Š†

Production number 2

‹

†

Product information

Display screen

After-sales service index (ASSI)

‹‚

Production number

”š

Production number 1

Š†

Production number 2

‹

†

Содержание PXX8 D3.E Series





















































Результаты поиска

Содержание PXX8 D3.E Series

Отзывы:

Похожие инструкции для PXX8 D3.E Series

Бренды по названию

Популярные бренды

Bosch PXX8 D3.E Series, Инструкция по эксплуатации

Результаты поиска

Содержание PXX8 D3.E Series

Отзывы:

Похожие инструкции для PXX8 D3.E Series

Бренды по названию

Популярные бренды