Bosch PXX8 D3.E Series Скачать руководство пользователя страница 20

Страница: 20 / 52

Flex Zone

Flex Zone

Flex Zone

You can use each flex zone as a single hotplate or as

two independent hotplates, as required.
It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As two independent hotplates

The flexible cooking zone is used like two independent

hotplates.

Activating

See section

"Operating the appliance"

As a single hotplate

Using the entire cooking zone by connecting both

hotplates.

Linking the two hotplates

Set down the cookware. Select one of the two

hotplates assigned to the flexible cooking zone and

set the heat setting.

Touch the

symbol. The display lights up.

The heat setting appears in the display for the lower

hotplate.

The flexible cooking zone is activated.

Changing the heat setting

Select one of the two hotplates in the flexible cooking

zone and change the heat setting in the settings range.

Adding a new item of cookware

Set the new item of cookware down on the cooker,

select one of the two hotplates in the flexible cooking

zone and then touch the

symbol twice. The new item

of cookware will be detected and the heat setting that

was previously selected will be retained.

Note:

If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Disconnecting the two hotplates

Select one of the two hotplates in the flexible cooking

zone and touch the

symbol.

This deactivates the flexible cooking zone. The two

hotplates will now function independently.

Notes

■

If the hob is switched off, and then switched back on

again later, the flexible cooking zone is reset to

function as two independent hotplates.

■

To change the configuration settings for the flexible

cooking zone, refer to section

"Basic settings"

As a single hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the four posi-

tions that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the three

positions that can be seen in the illustration.

If the cookware takes up more than one

hotplate, place it starting on the upper or

lower edge of the flexible cooking zone.

As two independent hotplates

The front and rear hotplates each have two induc-

tors and can be used independently of each other.

Select the required heat setting for each of the

hotplates. Use only one item of cookware on each

hotplate.

Содержание PXX8 D3.E Series





















































Результаты поиска

Содержание PXX8 D3.E Series

Отзывы:

Похожие инструкции для PXX8 D3.E Series

Бренды по названию

Популярные бренды

Bosch PXX8 D3.E Series, Инструкция по эксплуатации

Результаты поиска

Содержание PXX8 D3.E Series

Отзывы:

Похожие инструкции для PXX8 D3.E Series

Бренды по названию

Популярные бренды