12
Robert Bosch Hausgeräte GmbH
Do not use if the cord or appliance is damaged.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
,
Safety instructions for this appliance
Risk of injury
Risk of electric shock!
Do not insert mains plug until all preparations for working with
the appliance are complete. Never immerse the base unit in liquid
or hold under running water. Do not use a steam cleaner.
Do not adjust the swivel arm while the appliance is switched on.
Wait until the drive has come to a standstill.
Before replacing accessories or additional parts, which move during
operation, switch off the appliance and disconnect from the power
supply. Do not change tool/accessory until the drive is at a standstill –
when the appliance is switched off, the drive continues running briefly.
Use only the rotary switch to switch the appliance on or off.
When the appliance is not in use, pull out the mains plug.
Before eliminating a fault, pull out the mains plug.
The appliance restarts following a power interruption.
Risk of injury from the rotating tools!
Keep hands clear of rotating parts. While the appliance is operating,
never place fingers in the mixing bowl.
Do not change tools until the drive has come to a standstill – when
the appliance is switched off, the drive continues running briefly.
The appliance may only be operated when the unused drives have
been safeguarded with the drive covers (4, 7).
Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender!
Never assemble blender on the base unit. Do not remove/attach
the blender until the drive is at a standstill! Operate the assembled
blender only and with the lid attached.
Do not touch blender blades with bare hands.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0,5 litres of hot or frothing liquid.
Important!
Use only one tool or accessory at any one time.
en