Bosch MUM48RE, Руководство по эксплуатации

Страница: 15 / 173

Robert Bosch Hausgeräte GmbH 15
Blender Fig.

Warning!
Blender may be damaged. Do not process
deep-frozen ingredients (except ice cubes).
Do not operate blender when empty.
Warning!
Processing liquids in the glass blender
(available from dealers): maximum setting 3.
Add a max. 0.5 litres of hot or frothing liquid.

Press the Release button and move the
swivel arm to position 3.

Remove the blender drive cover.

Attach the blender jug (mark on the base
of the blender jug on the mark on the
base unit) and rotate as far as possible in
an anti-clockwise direction (Fig.

-4/5).

Add ingredients.
Maximum capacity of liquid for plastic
blender = 1 litre, for glass blender = 0.75
litres, frothing or hot liquid maximum
0.5 litres
Optimal processing capacity – solids
= 50–100 g;

Attach lid and press firmly.
While working, always hold the lid firmly
with one hand. However, do not place
hand over the refill opening!

Set the rotary switch to the desired
setting.
Adding more ingredients Fig.

-6

Switch off the appliance with the rotary
switch.

Remove the lid and add ingredients
or

remove the funnel and gradually add
solid ingredients through the refill
opening
or

pour liquid ingredients through the funnel.
After using the appliance

Switch off the appliance with the rotary
switch.

Remove mains plug.

Rotate the blender in a clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.
Cleaning and servicing
Attention!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit

Remove mains plug.

Wipe the base unit with a damp cloth.

If required, use a little detergent.

Then dry the base unit.
Cleaning the bowl and accessories
All parts are dishwasher-proof. Do not wedge
plastic parts in the dishwasher as they could
warp.
Cleaning the blender
Warning!
Do not use abrasive cleaning agents.
The blade insert is not dishwasher-proof.
Clean the blade insert under running
water only.
Tip: After processing liquids, it is often
sufficient to clean the blender without
disassembling it. Pour a little water and
washing-up liquid into the attached blender.
Switch on the blender for several seconds
(if the appliance features instantaneous
switching, select setting M).
Pour out the water and rinse out the blender
with clear water.
en
Risk of injury from sharp blades/
rotating drive!
Never place fingers in the attached
blender! Do not remove/attach the blender
until the drive is at a standstill!
Operate the assembled blender only and
with the lid attached.
Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a max.
0,5 litres of hot or frothing liquid.
Risk of electric shock!
Never immerse the base unit in water
or place under running water.
Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. The blender can be disassembled
for cleaning.