manualshive.com logo in svg

Bosch KBR16-3, Инструкция по установке и обслуживанию, Страница: 65 / 100

Поделиться
Скачать
Bosch KBR16-3 Скачать руководство пользователя страница 65

Environmental responsibility/disposal

 | 

65

6 720 810 590 (2015/05)

Greenstar FS

14

Environmental responsibility/disposal

Environmental responsibility is one of the fundamental company 
policies of the Bosch Group. 
We regard quality of performance, economy and environmental 
responsibility as equal objectives. Environmental protection laws and 
regulations are strictly adhered to.
To protect the environment, we use the best possible technology and 
materials taking into account economic points of view.

Packaging

All packaging materials used are environmentally-friendly and 
recyclable.

Old appliances

Old appliances contain resources that must be submitted for recycling.
The components are easy to separate and the plastics are marked. This 
allows the various components to be sorted for appropriate recycling or 
disposal.

15

Inspection and maintenance

Annual service and maintenance is required for a long service life of the 
appliance, for efficient and economical operation, and to keep the 
environmental impact as low as possible. Owners/operators are 
encouraged to sign a service and maintenance contract with a trained 
and certified installer for annual servicing and maintenance of the boiler.

Heat exchanger

Heatronic boiler control

In case of a component defect, a fault is shown on the display.

The Heatronic boiler control monitors all safety and control 
components. 

Notes on installation and operation

• The following analytical tools are needed for service and 

maintenance:
– Electronic flue gas analyzer for CO

2

, O

2

, CO, and flue gas 

temperature

– Pressure gauge 0 to 12 inches W.C. (0 to 30 mbar)
– pH Test strips
– Glycol tester of antifreeze is being used

• Special tools are not required.
• Approved lubricants are:

– For parts touched by water: Unisilkon L 641 

(part-# 8 709 918 413 0)

– or fittings: HFt 1 v 5 (part-# 8 709 918 010 0).

▶ Use part-# 8 719 918 658 0 as heat conducting paste.
▶ Use only genuine Bosch spare parts.
▶ Request spare parts (

 Section 19, page 80).

▶ Replace removed gaskets and O-rings with new ones.

After the inspection/maintenance

▶ Re-tighten all loosened threaded connections.
▶ Restart the appliance (

page 49).

▶ Check all connections for leaks.
▶ Check the gas-air ratio and adjust if necessary (

page 63).

15.1

Description of various steps

15.1.1 Calling up the latest fault (service function 6.A)

▶ Select service function 

6.A

 (

page 60).

15.1.2 Fresh water filter (only combi boiler KWB..-3A)

▶ Close cold water tap.
▶ Depressurize the cold water pipe.
▶ To access the filter remove the safety clip (step 1), pull out the pipe 

(step 2), and remove the filter from the pipe (step 3).

▶ If necessary, clean with plastic brush under running water.

DANGER: 

Explosion!

▶ Close the gas cock prior to working on the gas train.
▶ Check for gas leaks after carrying out work on the gas 

train.

DANGER: 

Risk of flue gas poisoning.

▶ Check for leaks after carrying out work on the venting 

system.

DANGER: 

Risk of electric shock!

▶ Always disconnect the appliance from the mains 

power before performing any work. Disconnect the 
emergency shutoff switch or disengage the heating 
system circuit breaker. Take measures to prevent 
accidental re-connection.

NOTICE: 

 Insufficient antifreeze can accelerate 

corrosion.
▶ Frost protection level has to be checked annually 

during the regular scheduled maintenance of the 
condensing boiler.

NOTICE: 

Damage to the coating of the heat exchanger.

▶ Cleaning of the heat exchanger should not be 

necessary until five years after the initial 
commissioning. 

▶ Only use a Bosch cleaning blade or Bosch cleaning 

brush (

page 68).

▶ Only clean heat exchanger if soiling is clearly visible.

NOTICE: 

The Heatronic boiler control can be damaged 

by leaking water.
▶ Cover the Heatronic prior to working on water filled 

components.

An overview of the faults can be found on page 74.

An overview of the faults can be found on page 74.

Содержание KBR16-3





































































































Отзывы:

Нет отзывов