manualshive.com logo in svg

Bosch KBR16-3, Инструкция по установке и обслуживанию, Страница: 3 / 100

Поделиться
Скачать
Bosch KBR16-3 Скачать руководство пользователя страница 3

Key to symbols and safety instructions

 | 

3

6 720 810 590 (2015/05)

Greenstar FS

10 Boiler circulator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53

10.1

Pump anti-seize protection  . . . . . . . . . . . . . . . . . . . . . .  53

10.2

Changing the pump curve of the boiler pump  . . . . . . .  53

11 Heatronic boiler control settings . . . . . . . . . . . . . . . . . . . . . . .  54

11.1

Guideline to service functions . . . . . . . . . . . . . . . . . . . .  54

11.2

Overview of the service functions . . . . . . . . . . . . . . . . .  54

11.2.1 First service level (press and hold the service button  until 

it lights up) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  54

11.2.2 Second service level (at first service level, service button 

lights up, press ECO button and key pad lock button 
simultaneously until 8.A appears)  . . . . . . . . . . . . . . . .  55

11.3

Description of the service functions . . . . . . . . . . . . . . .  55

11.3.1 First service level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55
11.3.2 Second service level  . . . . . . . . . . . . . . . . . . . . . . . . . . .  58

12 Gas type conversion  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60

12.1

Converting to a different gas type . . . . . . . . . . . . . . . . .  60

12.2

Installation location higher than 2,000 feet (610 m) 
above sea level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60

12.3

Setting the gas-air ratio (CO2 or O2)  . . . . . . . . . . . . . .  61

12.4

 Dynamic gas pressure test  . . . . . . . . . . . . . . . . . . . . . .  62

13 Flue gas test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62

13.1

Emissions test button  . . . . . . . . . . . . . . . . . . . . . . . . . .  62

13.2

Measuring CO content of flue gas  . . . . . . . . . . . . . . . . .  62

14 Environmental responsibility/disposal  . . . . . . . . . . . . . . . . .  63

15 Inspection and maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . .  63

15.1

Description of various steps  . . . . . . . . . . . . . . . . . . . . .  63

15.1.1 Calling up the latest fault (service function 6.A)  . . . . .  63
15.1.2 Fresh water filter (only combi boiler KWB..-3A)  . . . . .  63
15.1.3 Plate type heat exchanger (only combi boiler KWB..-3A)  .

64

15.1.4 Checking the electrodes  . . . . . . . . . . . . . . . . . . . . . . . .  65
15.1.5 Burner servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
15.1.6 Heat exchanger block inspection and cleaning  . . . . . .  66
15.1.7 Condensate trap cleaning  . . . . . . . . . . . . . . . . . . . . . . .  67
15.1.8 Checking the mixer diaphragm  . . . . . . . . . . . . . . . . . . .  68
15.1.9 Expansion vessel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  68
15.1.10Setting the boiler water pressure . . . . . . . . . . . . . . . . .  68
15.1.11Testing system water quality . . . . . . . . . . . . . . . . . . . . .  68
15.1.12Inspecting electrical wiring  . . . . . . . . . . . . . . . . . . . . . .  68
15.2

Checklist for annual inspection and maintenance  . . . .  69

16 Readings on the display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  70

17 Faults  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71

17.1

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71

17.2

Faults that are shown on the display . . . . . . . . . . . . . . .  72

17.3

Faults that are not shown on the display  . . . . . . . . . . .  74

17.4

Check sensor values  . . . . . . . . . . . . . . . . . . . . . . . . . . .  75

17.4.1 Outdoor temperature sensor  . . . . . . . . . . . . . . . . . . . .  75
17.4.2 Additional supply temperature limiter  . . . . . . . . . . . . .  75
17.4.3 Supply temperature sensor, External supply temperature 

sensor, DHW tank temperature sensor, DHW temperature 
sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

17.5

Replacement code plug . . . . . . . . . . . . . . . . . . . . . . . . .  75

18 Commissioning log for the appliance  . . . . . . . . . . . . . . . . . . .  76

19 Spare parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  78

1

Key to symbols and safety instructions

1.1

Key to symbols

Warnings

Keywords at the start of a warning indicate the type and seriousness of 
the ensuing risk if measures to prevent the risk are not taken. The 
following keywords are defined and can be used in this document:
•

DANGER

 indicates a hazardous situation which, if not avoided, will 

result in death or serious injury.

•

WARNING

 indicates a hazardous situation which, if not avoided, 

could result in death or serious injury.

•

CAUTION

 indicates a hazardous situation which, if not avoided, 

could result in minor to moderate injury.

Important information

Additional symbols

Warnings in this document are identified by a warning
triangle printed against a grey background.
Keywords at the start of a warning indicate the type and
seriousness of the ensuing risk if measures to prevent
the risk are not taken.

NOTICE: 

Contains no warning triangle and indicates a 

situation that could result in damage to property or 
equipment, but no personal injury.

This symbol indicates important information where 
there is no risk to people or property.
Important information for the proper use of the boiler is 
also provided in this manual. You will find the 
information with a symbol shown on the left and 
bordered by horizontal lines above and below the text.

Symbol Explanation

▶

Sequence of steps

 

Cross-reference to other points in this document or to other 
documents

•

Listing/list entry

–

Listing/list entry (2nd level)

Содержание KBR16-3





































































































Отзывы:

Нет отзывов