Bosch HBC34D.54., Инструкция по эксплуатации

Страница: 8 / 32

8
Fill the water tank before each use:
1.
Open the appliance door and take out the water tank.
2.
Fill the water tank with cold water up to the "max" mark.
3.
Close the tank cover until you feel it engage.
4.
Slide in the water tank until it engages.
Switching on the appliance
1.
Turn the operating mode selector to the required operating
mode.
2.
Turn the temperature selector to set the temperature.
For operating modes involving steam, you must now set a
cooking time (see also section: Time-setting options). A
default cooking time then appears in the display.
3.
Press 0 repeatedly until the brackets are around the r
Cooking time.
4.
Use the @ or A button to set the cooking time.
5.
Press the
n
button to start cooking.
The appliance heats up.
The
t
symbol lights up until the set temperature has been
reached and each time the temperature rises.
In the
è
Steam operating mode, the cooking time does not
start counting down until the heating-up time has finished.
If the cooking operation does not start, but an audible signal
sounds, you have set a temperature outside of the possible
temperature range. Check the temperature range for the
operating mode.
Changing the temperature
You can change the temperature at any time. To do this, turn
the temperature selector.
If you set a temperature that lies outside the possible
temperature range, the cooking operation is interrupted
(Pause).
Pause
Briefly press the n button to interrupt cooking (Pause). The
cooling fan may continue running. Press the
n
button to start.
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the
n
button
to restart.
If you have switched on the basic setting "Continue operation
after closing door", restarting is not required (see section: Basic
settings).
Ë
Display
If the water tank is empty, an audible signal sounds and the Ë
symbol (Fill water tank) appears. Cooking is interrupted.
1.
Open the appliance door carefully.
N.B.: Hot steam will escape.
2.
Remove the water tank, fill up to the "max" mark and slide the
tank back in.
3.
Press the
n
button.
Switching off the appliance
ã=
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the
n button to end cooking. If you have set a
cooking time, cooking is ended automatically. An audible signal
sounds. Press the 0 button to stop the audible signal.
To switch off the appliance, turn the operating mode and
temperature selectors back to Û .
The cooling fan may continue to run when you open the
appliance door.
After each use
Emptying the water tank.
1.
Open the appliance door carefully.
Hot steam will escape.
2.
Remove and clean the water tank.
3.
Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
ã=
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
1.
Leave the appliance door ajar until the appliance has cooled
down.
2.
Once it has cooled down, wipe out the cooking compartment
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
3.
Remove food residues from the cooking compartment as
soon as the appliance has cooled. Burnt-on remains will be
much harder to remove later.
4.
Wipe kitchen units or handles if condensation has formed on
them.
Operating mode Temperature range
5
Hot air 30 - 230 °C
è
Steam 35 - 100 °C
å
Combination 120 - 230 °C
ã
Reheat 100 - 180 °C
PD[