Bosch HBC34D.54., Инструкция по эксплуатации

Страница: 15 / 32

15
Roasting set
If possible, use the roasting set when roasting (ordering
no. HEZ36DB, also available online in the eShop). This
considerably reduces the amount of spatter from the roast and
therefore the amount of soiling in the cooking compartment.
Cleaning aid
The cleaning aid loosens dirt in the cooking compartment using
steam. It can then be removed easily.
The cleaning process consists of:
■
Cleaning (approx. 30 minutes), then empty the evaporator
dish and wipe out the appliance
■
1st rinse (20 seconds), then empty the evaporator dish
■
2nd rinse (20 seconds), then remove the remaining water
All three steps must be completed in full. The appliance is
ready for operation again only after the 2nd rinse.
Preparation
Allow the cooking compartment to cool down and remove the
accessories. Clean the evaporator dish with the enclosed
cleaning sponge.
Put a drop of washing-up liquid into the evaporator dish on the
cooking compartment floor.
Starting the cleaning aid
1.
Turn the operating mode selector to È Cleaning aid.
2.
Fill the water tank with water up to the "max" mark and slide it
in.
3.
Press the
n
button.
The cleaning aid starts running. The light in the cooking
compartment remains switched off.
Emptying the evaporator dish and wiping out the appliance
An audible signal sounds after approx. 30 minutes. The
É
(Empty evaporator dish) and [ r ] ‹‹ : …‹ min symbols appear.
1.
Open the appliance door.
2.
Take the rails out of the cooking compartment and clean
them (see section: Cleaning the rails).
3.
Wipe out all loosened food residues from the cooking
compartment and the evaporator dish using a soft washing-
up brush and the cleaning sponge.
4.
If required, fill the water tank with water and reinsert it.
5.
Close the appliance door.
1st rinse
Press the
n
button.
The appliance starts rinsing.
Empty evaporator dish
After 20 seconds, É (Empty evaporator dish) and [ r ] ‹ : ƒ‹
appear.
1.
Open the appliance door.
2.
Thoroughly rinse out the cleaning sponge.
3.
Remove the remaining water from the evaporator dish using
the cleaning sponge.
4.
Close the appliance door.
2nd rinse
Press the n button.
The appliance starts rinsing.
Removing the remaining water
After 20 seconds,
É
(Empty evaporator dish) and
‹‹
:
‹‹
appear in the display.
1.
Open the appliance door.
2.
Remove the remaining water from the evaporator dish using
the cleaning sponge.
3.
Wipe out the cooking compartment using the cleaning
sponge and then dry with a soft cloth.
4.
To switch off the appliance, turn the operating mode selector
back to Û .
The cleaning aid has finished.
Cancelling the cleaning aid
Note:
After cancelling the cleaning aid, the appliance must be
rinsed twice. The appliance is locked for other applications until
the second rinsing operation is complete.
1.
Press and hold the n button in order to cancel the cleaning
aid.
[
r ] ‹‹ : …‹ min appears in the display.
To ensure that no washing-up liquid remains in the appliance,
it must be rinsed twice after a cancellation.
2.
Press the
n
button.
The
É
symbol (Empty evaporator dish) appears.
Now proceed as described in the section “Emptying the
evaporator dish and wiping out the appliance”.
Descaling
The appliance must be descaled at regular intervals in order for
it to continue operating correctly. The Ê indicator reminds you
to do this.
You can only dispense with descaling completely if you
exclusively use softened water.
The descaling operation consists of:
■
Descale (approx. 30 minutes), then refill the water tank and
empty the evaporator dish
■
1st rinse (20 seconds), then empty the evaporator dish
■
2nd rinse (20 seconds), then remove the remaining water
All three steps must be completed in full. The appliance is
ready for operation again only after the 2nd rinse.
Descaler
Only use the liquid descaler recommended by the after-sales
service for descaling (product no. 311 138, also available
online from the eShop). Other descalers may damage the
appliance.
1.
Prepare a descaling solution by mixing 300 ml water and
60 ml liquid descaler.
2.
Empty the water tank and fill with descaling solution.
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Starting descaling
The cooking compartment must have cooled down completely.
1.
Turn the operating mode selector to r Descale.
2.
Slide in the water tank containing the descaling solution and
close the appliance door.
3.
Press the
n
button.
The descaling process starts. The light in the cooking
compartment remains switched off.
Emptying the evaporator dish and refilling the water tank
An audible signal sounds after approx. 30 minutes. The Ë
symbol (Fill water tank) and [ r ] ‹‹ : …‹ min are displayed.
1.
Open the appliance door.
2.
Rinse the water tank thoroughly, fill with water and reinsert.
The
É
symbol (Empty evaporator dish) appears.