Bosch HBC34D.54., Инструкция по эксплуатации

Страница: 13 / 32

13
Childproof lock
The appliance has a childproof lock to prevent children
switching it on accidentally or changing a setting.
Activating the childproof lock
Press and hold the D button for approx. 4 seconds until the
D symbol appears.
The control panel is locked.
Even with the childproof lock activated, you can switch the
appliance off, set the timer and switch off the audible signal
using the
%
button or pressing and holding the
n
button.
Deactivating the childproof lock
Press and hold the
D
button until the symbol goes out. You
can make settings again.
Basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
If you want to cancel all the changes, you can restore the
factory settings.
1.
If required, turn the operating mode selector to Û to switch off
the appliance.
2.
Press and hold the 0 button until ™‹ „ (display brightness =
bright) appears in the display.
3.
Press the 0 button until the desired basic setting appears.
4.
Press the
A
or
@
button to change the basic setting.
5.
Press and hold the
0
button to exit basic settings.
The change is saved.
You can change the following basic settings:
Automatic safety cut-out
If you do not change the settings on your appliance for several
hours, the automatic safety switch-off function will be activated.
”‰
appears in the display.
Press any button to deactivate the automatic safety switch-off.
You can now make new settings.
Basic setting Function Possible settings
™‹ „
Display brightness
™‹ ‚
= dark
™‹ ƒ
= medium
™‹ „ = bright
™‚ ƒ
Signal duration:
Sets the length of the audible signal at the end of an opera-
tion
™‚ ‚
= short (10 seconds)
™‚ ƒ = medium (2 minutes)
™‚ „
= long (5 minutes)
™ƒ ‚
Displays the clock when the appliance is off
™ƒ ‹
= off
™ƒ ‚
= on
™„ ‚
Continues after the door is closed. The operation does not
go back to the beginning when the appliance door is opened
™„ ‹ = off
™„ ‚
= on
™… ƒ
Time until changes are automatically saved
™… ‚
= short (2 seconds)
™… ƒ = medium (5 seconds)
™… „
= long (10 seconds)
™† ƒ
Sets the water hardness range for the descaling indicator
™† ‹
= softened
™† ‚ = soft (I)
™† ƒ
= medium (II)
™† „
= hard (III)
™† …
= very hard (IV)
™‡ ‹
Steam cooking heat signal:
™‡ ‹
= off
™‡ ‚ = on
™ˆ ‹
Restores the appliance to the factory settings:
■
all changes to the basic settings are cleared
■
Automatic calibration is carried out again
™ˆ ‹
= do not restore
™ˆ ‚ = restore