Bosch Hagglunds CB Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 68

background image

8/68

Safety instructions

Bosch Rexroth Mellansel AB

,

Installation and maintenance manual , Hägglunds CB, RE 15302-WA/05.2019

•

Using the Radial piston motor under water without necessary additional measures.

• Using the Radial piston motor when the exterior pressure is greater than the

interior pressure (case pressure).

• Using the Radial piston motor in explosive environments unless the component or

machine/system has been certified as compliant with the ATEX directive 2014/34/EU.

•

Using the Radial piston motor in an aggressive environment without necessary

additional measures.

2.4

Personnel qualifications

The activities described in this documentation require basic mechanical, electrical

and hydraulic knowledge, as well as knowledge of the associated technical terms.
For transporting and handling of the product, additional knowledge is necessary

with regard to working with a lifting device and the corresponding attachment

equipment. In order to ensure safe use, these activities may therefore only be carried
out by appropriate qualified personnel or a trained person under the direction and
supervision of qualified personnel.
Qualified personnel are those who can recognize possible hazards and institute
the appropriate safety measures due to their professional training, knowledge, and

experience, as well as their understanding of the relevant regulations pertaining

to the work to be done. Qualified personnel must observe the rules relevant to the
subject area and have the necessary hydraulic knowledge.
Hydraulic knowledge means, for instance:

•

reading and fully understanding hydraulic diagram,

•

fully understanding in particular the interrelationships regarding safety devices and
having knowledge on the function and assembly of hydraulic components.

Bosch Rexroth offers training support for special fields. For more information about
training, please contact your Bosch Rexroth representative.

2.5 General safety instructions

• Follow current accident prevention and environmental protection rules.

•

Observe the safety rules and regulations of the country in which the product is

used.

•

Do not use Bosch Rexroth products unless they are in perfect working order.

• Follow all the instructions on the product.

• Persons who install, operate, remove or maintain Bosch Rexroth products must

not consume any alcohol, drugs or pharmaceuticals that may affect their ability to

respond.

•

Use only genuine

Bosch Rexroth spare parts to avoid the risk of personal injury

through using unsuitable parts.

•

Comply with the technical data and ambient conditions stated in the product

documentation.

«
...
6
7
8
9
10
...
»

Содержание Hagglunds CB





































































Отзывы:

Нет отзывов

Похожие инструкции для Hagglunds CB

Viper Engines 31321

Бренд: Ardisam Страницы: 20

Бренд: Nanni Страницы: 13

Бренд: Briggs & Stratton Страницы: 102

Бренд: BONFIGLIOLI Страницы: 20

Бренд: Jula Страницы: 17

Calzoni MR Series

Бренд: Parker Страницы: 50

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 16

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 13

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды