Bosch GCD 12 JL Professional Скачать руководство пользователя

Страница: 26 / 333

| English

Work preparation

Extending the saw table (see figure D)

The free end of long and heavy workpieces must have some-
thing placed underneath it or be supported.
The left side of the saw table can be extended using the saw
table extension

(11)

– Push the clamping lever

(10)

downwards.

– Pull out the saw table extension

(11)

to the required

length.

– To lock the saw table extension, pull the clamping lever

(10)

back up.

Setting the mitre angle (see figure E)

The mitre angle can be set between 0° and 45°.
Important settings are marked with corresponding markings
on the angle guide

(6)

. The 0° and 45° positions are secured

by the respective end stop.
– Loosen the clamping handle

(13)

of the angle guide

(6)

– Turn the angle guide

(6)

until the angle indicator

(33)

in-

dicates the desired mitre angle on the scale

(34)

– Retighten the clamping handle

(13)

Marking the Cutting Line (see figure F)

A laser beam shows you the cutting line of the saw blade.
This allows for exact positioning of the workpiece for sawing,
without having to open the retracting blade guard.
– To activate this, turn on the laser beam using the

switch

(19)

– Align your mark on the workpiece with the right-hand

edge of the laser line.

Note:

Before sawing, check whether the cutting line is still

indicated correctly. The laser beam can be misplaced due to
vibrations from intensive use, for example.

Clamping the workpiece (see figure G)

To ensure maximum safety while working, the workpiece
must always be firmly clamped. Do not saw workpieces that
are too small to clamp firmly.
The free end of long and heavy workpieces must have some-
thing placed underneath it or be supported.
The free end of long and heavy workpieces must have some-
thing placed underneath it or be supported.
– Place the workpiece against the angle guide

(6)

– Slide the locking spindle

(7)

against the workpiece and

clamp the workpiece in place using the spindle handle

(9)

Releasing the workpiece

– Release the spindle handle

(9)

– Open the quick release

(8)

and pull the locking spindle

(7)

away from the workpiece.

Working advice

General sawing instructions

Protect the saw blade against impact and shock. Do not sub-
ject the saw blade to lateral pressure.

Do not saw warped/bent workpieces. The workpiece must
always have a straight edge to face against the fence.
The free end of long and heavy workpieces must have some-
thing placed underneath it or be supported.

Permissible workpiece dimensions
Maximum

workpiece dimensions:

Workpiece shape

Mitre angle

0°

45°

Dia. 115

Dia. 90

100 x 100

85 x 85

158 x 80

85 x 85

110 x 110

85 x 85

Minimum

workpiece dimensions

(= all workpieces that can still be clamped in place with the
locking spindle

(7)

): Length 80 mm

Max. cutting depth

(0°/0°): 115 mm

Dust/chip extraction (see figure H)

The dust from materials such as lead paint, minerals and
metal can be harmful to human health. Touching or breath-
ing in this dust can trigger allergic reactions and/or cause
respiratory illnesses in the user or in people in the near vicin-
ity.
Certain kinds of metal dust are hazardous, especially in com-
bination with alloys such as zinc, aluminium or chrome. Ma-
terials containing asbestos may only be machined by special-
ists.
– Provide good ventilation at the workplace.
– It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
The saw blade

(31)

can become blocked by dust, chips or

workpiece fragments in the recess of the saw table

(25)

– Switch the power tool off and pull the mains plug out of

the socket.

– Wait until the saw blade has come to a complete stop.
– Pull out the chip drawer

(24)

and empty it completely.

Avoid dust accumulation at the workplace.

Dust can

easily ignite.