Bosch GCD 12 JL Professional, Оригинальное руководство пользователя

Страница: 23 / 333

English | 23
u
Only use the power tool for dry cutting. Water entering
a power tool increases the risk of electric shock.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
u
Never make warning signs on the machine unrecognis-
able.
u
The power tool is delivered with a laser warning sign
(see table: "Symbols and their meaning")
.
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself.
You could
blind somebody, cause accidents or damage
your eyes.
u
If laser radiation hits your eye, you must close your
eyes and immediately turn your head away from the
beam.
u
Do not use any optical instruments such as binoculars
to view the radiation source.
Doing so can damage your
eye.
u
Do not direct the laser beam at persons who are look-
ing through binoculars or similar instruments.
Doing
so can damage their eye.
u
Do not make any modifications to the laser equip-
ment.
The setting options described in these operating
instructions can be used safely.
u
Do not use the laser goggles (accessory) as protective
goggles.
The laser goggles make the laser beam easier to
see; they do not protect you against laser radiation.
u
Do not use the laser goggles (accessory) as
sunglasses or while driving.
The laser goggles do not
provide full UV protection and impair your ability to see
colours.
u
Warning! If operating or adjustment devices other
than those specified here are used or other proced-
ures are carried out, this can lead to dangerous expos-
ure to radiation.
u
Do not replace the integrated laser with a laser of an-
other type.
A laser that is not compatible with this power
tool could pose a risk to persons.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
IEC 60825-1:2014
<0.39mW, 650 nm
LASER RADIATION
DO NOT EXPOSE USERS OF
TELESCOPIC OPTICS
CLASS 1M LASER PRODUCT
LASER RADIATION
DO NOT EXPOSE USERS OF TELE-
SCOPIC OPTICS
CLASS 1M LASER PRODUCT
Keep hands away from the cutting area
while the power tool is running.
Con-
tact with the saw blade can lead to injur-
ies.
Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear a dust mask.
Take note of the dimensions of the saw
blade. The hole diameter must fit the tool
spindle without play. If it is necessary to
use reducers, ensure that the dimensions
of the reducer are suitable for the base
blade thickness and the saw blade hole
diameter, as well as the tool spindle dia-
meter. Wherever possible, use the redu-
cers provided with the saw blade.
The saw blade diameter must match the
information specified on the symbol.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for stationary use with saw
blades to make straight cuts with and against the grain, as
well as mitre angles up to 45° in metal materials without the
use of water.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Bosch Power Tools 1 609 92A 7N3 | (26.04.2022)