FlexiDome IP
Configuration via the browser | en
59
Bosch Security Systems
Operating Instructions
V 1.0 | 2006.12
7.7.2
iSCSI LUN map
The LUN map displays the logical drives configured for the
iSCSI storage device. The current user is displayed for each
drive.
1.
Double-click a free drive (LUN). The associated information
is called up and automatically displayed in the fields below
the map.
2.
If the logical drive is password protected, you must first
enter the password in the Target password field and click
the
Set
button.
3.
After entering all the settings in the relevant fields, click
Set
. The camera attempts to create a connection to the
required drive using this data.
As soon as a connection has been established, the selected
drive is used for recordings.
7.7.3
Target IP address
Enter the IP address of the required iSCSI server here.
7.7.4
Target node
Enter the number of the iSCSI server target node.
7.7.5
Target LUN
Enter the LUN of the required drive.
7.7.6
Target password
If the drive is password protected, enter the password.
i
NOTICE!
When the information cannot be read due to the
network topology you must enter the data manually so that the
camera can access the drive. In this case you should ensure
that the entries correspond exactly with the configuration of
the iSCSI device.
i
NOTICE!
You may not enter a new password. This is only possible by
configuring the iSCSI storage device.
