12
en |
FlexiDome IP
V 1.0 | 2006.12
Operating Instructions
Bosch Security Systems
Video loss
Video loss is inherent to digital video recording; therefore,
Bosch Security Systems cannot be held liable for any damage
that results from missing video information. To minimize the
risk of lost digital information, Bosch Security Systems recom-
mends multiple, redundant recording systems, and a procedure
to back up all analog and digital information.
!
CAUTION!
–
Camera Grounding - For mounting the camera in poten-
tially damp environments, ensure to ground the system
using the ground connection of the power supply connec-
tor (see section: Connecting external power supply).
–
U.S.A. models only -
Section 810
of the
National Electrical
Code, ANSI/NFPA No.70
, provides information regarding
proper grounding of the mount and supporting structure,
grounding of the coax to a discharge unit, size of grounding
conductors, location of discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
–
Permanently connected equipment - Incorporate a readily
accessible disconnect device in the building installation
wiring.
–
PoE - Never supply power via the Ethernet connection
(PoE) when power is already supplied via the power con-
nector.
–
Pole power switch - Incorporate an all-pole power switch,
with a contact separation of at least 3 mm in each pole,
into the electrical installation of the building.
–
Power lines - Do not locate the camera near overhead
power lines, power circuits, or electrical lights, nor where
it may contact such power lines, circuits, or lights.
