44
en | Configuration via the browser
FlexiDome IP
V 1.0 | 2006.12
Operating Instructions
Bosch Security Systems
servers. The device calls up the time signal automatically once
every minute.
Unit time zone
Select the time zone in which the system is located.
Daylight saving time
The internal clock can automatically switch between normal
and daylight saving time (DST). The camera already contains
the tables for DST switch overs up to the year 2015. These can
be used or modified, if required. If you do not create a table,
there is no automatic switching. When editing the table, note
that values generally occur in linked pairs (DST start and end
dates).
First check the time zone setting. If it is not correct select the
appropriate time zone for the system:
1.
Click
Set
.
2.
Click
Details
. A new window opens showing an empty
table.
3.
Click
Generate
to fill the table with the preset values from
the camera.
4.
Select the region or the city which is closest to the sys-
tem's location from the list box below the table.
5.
Click one of the entries in the table to make changes. The
entry is highlighted.
6.
Clicking
Delete
removes the entry from the table.
7.
Choose other values from the list boxes under the table, to
change the selected entry. Changes are immediate.
8.
If there are empty lines at the bottom of the table, for
example after deletions, you can add new data by marking
the row and selecting values from the list boxes.
9.
When you are finished, click
OK
to save and activate the
table.
Time server IP address
Enter the IP address of a time server.
Time server type
Choose the protocol used by the selected time server.
