Bosch DICENTIS, Руководство по настройке

Страница: 109 / 134

DICENTIS Hints and Tips | en 109
Bosch Security Systems B.V.
Configuration manual
2021.06 | V3.7 |
14 Hints and Tips
This Chapter gives information on:
–
Changing NetTime options, page 109
–
Configuring secretary’s PC for use in other VLAN as DICENTIS server, page 110
– Disabling control encryption, page 110
–
Making a backup of the database, page 111
– Restoring a database, page 111
– Updating a database to the current version, page 111
–
Creating a clean database, page 111
– Deleting a database, page 112
–
Connecting DICENTIS to a (remote) SQL server, page 112
– Downgrading DICENTIS software to a previous version, page 114
– Downgrading 2.40 or later DICENTIS software to a 2.31 or earlier version, page 115
–
Installing the image server on a different computer, page 116
– Recovering devices from fail-safe mode, page 116
–
Replacing a defective device, page 116
– Uploading and accessing files, page 117
– Configuring the date and time format of the DICENTIS Multimedia device, page 118
– Using a fixed IP address for the DICENTIS server in a DICENTIS system with ARNI support,
page 119
–
Selecting a network interface to work with DICENTIS, page 119
– Powering down the server via the power button, page 120
–
Camera and presentation streams, page 120
– Making a backup and restoring your Synoptic configuration, page 120
– Configuring Dante™ compatible devices, page 121
–
Setting a PIN code for a Dante™ device, page 121
– Adding a third-party application to a device, page 122
–
Adding additional keyboards to a device, page 122
– Keeping third-party android apps on top on the multimedia device when changing agenda
items, page 123
–
Creating certificates using the command line tool, page 124
– Remove unused images, page 124
–
ONVIF Camera discovery, page 125
14.1 Changing NetTime options
NetTime is used to synchronize timers used in the DICENTIS Conference System. If the
DICENTIS Conference System is used in a corporate environment, you might have to change
the NetTime options.
To change these options:
1.
Right click the NetworkTime icon in the notify area, and select Properties -> Settings …
2. Enter the correct Hostname or IP Address of the Time server in your environment.
Normally the time server is the same server as the DHCP server. Consult your local IT
department for more information.
3. Click OK .
4. Click stop , and then click start to activate the new settings.
NOTE: Remember to change the service Windows Time to Automatic after uninstalling
NetTime.