Bosch DCN-SWSACC, Руководство пользователя программного обеспечения

Страница: 12 / 28

12 en | System
Bosch DCN Standalone Automatic Camera
Control
DCN-SWSACC_V4.0 | V1.0 | 2011.10 Software Manual Bosch Security Systems B.V.
4 System
This workflow describes the system settings:
4.1 PC Communication Settings
DCN system:
The DCN system: option defines the Serial communication: port of the PC to which the DCN-
CCU is connected. Selecting --None-- disables the connection to the DCN system: .
For DCN-CCU2 or DCN-NCO a Host name or IP address: must be entered. The IP address of
the unit can be found in the front menu of the DCN-CCU2 or DCN-NCO.
Camera system:
The Camera system: option defines the Serial communication: port of the PC to which the
Camera system: is connected. Selecting --None-- disables the connection to the Camera
system: .
4.2 Video Url
To see a video image of an AutoDome camera with IP-module in the browser of Assign &
store , the following Url: can be used: "http://192.168.0.1/MPEG4.html". Where 192.168.0.1 is
the default IP address of the AutoDome.
NOTICE!
IP address may not contain leading zeros.
NOTICE!
You need to have Sun Java and the MPEG4-ActiveX installed. Refer to the AutoDome user
manual for more information.
In case the Url: is not correct or cannot be reached, the browser reports an appropriate
message or will be empty. Note that the Url: must always start with http://, MPEG must be in
capitals.
The browser in workflow Assign & store is hidden when the Url: is empty or only holds white
spaces.