Bosch DCN-SWSACC, Руководство пользователя программного обеспечения

Страница: 15 / 28

Bosch DCN Standalone Automatic Camera
Control
Assign & store | en 15
Bosch Security Systems B.V. Software Manual DCN-SWSACC_V4.0 | V1.0 | 2011.10
6 Assign & store
This workflow is used to assign prepositions to the units of the DCN system and store the
prepositions in the Camera system.
Figure 6.1 Assign & store main window
The Assign & store main window contains the following elements:
1. Assignment list showing units including the assigned cameras.
2. Navigation buttons, to navigate through all the units.
3. Remove selected (disconnected) seat button. To remove a single unit from the list which
is not connected to the DCN system.
4. Remove all disconnected button. To remove all units from the list which are not
connected to the DCN system.
5. Start configure button. To start the configuration mode of the DCN system.
6. Preposition text box to select or define a preposition.
7. Camera menu button to activate the on-screen Camera menu to change AutoDome
settings which are embedded in the AutoDome (Refer to the AutoDome user manual for
details).
8. Assign & store button. To assign prepositions to the unit and to store prepositions in the
Camera system.
9. Pan-Tilt-Zoom-Focus-Iris controls. To control the AutoDome camera.
10. Browser. To see a video image of an AutoDome camera with IP-module.
The system can be configured in two different ways:
1. Using a Section 6.1 Temporarily PC with 2 serial ports or;
2. a Section 6.2 Temporarily PC with 1 serial port .