Installation
This section describes the installation requirements and options for the Control Unit and
Extension Unit.
Install Unit(s)
The Control Unit and Extension Unit can be placed on a table top or installed in a 19” rack:
Figure 5.1: 19” rack installation
If you decide to install the unit(s) in a 19” rack:
–
do not attach the feet to the bottom of the unit(s).
–
make sure the rack is of suitable quality to support the weight of the unit(s).
–
use the supplied 19" rack mounting brackets and screws to attach the unit(s) to the rack.
Take care when lifting and attaching the unit(s).
–
make sure the ventilation holes on the side of the unit(s) are unobstructed.
–
make sure the temperature inside the rack cannot 45 °C.
If you want to use the unit(s) on a table top:
–
click the four feet into place at the bottom of the unit(s).
–
keep the mounting brackets and screws in case you want to install the unit(s) in a rack in
the future.
5
5.1
Digital Discussion System
Installation | en
23
Bosch Security Systems B.V.
Operation manual
2016.05 | V2.0 |
Содержание CCS 1000 D
Страница 1: ...Digital Discussion System CCS 1000 D en Operation manual ...
Страница 2: ......
Страница 69: ......