Bosch CCS 1000 D, Руководство по эксплуатации

Страница: 51 / 70

Power
Preconditions:
–
The logged on user must have the access right: Prepare system.
Click the Power button on the homepage to display the ‘power’ pop‑up window.
–
On: Activates the Control Unit: After a few seconds, the system is ready for use.
– Standby: Sets the Control Unit to ‘standby’ and switches off the Discussion Devices:
–
All LEDs on the Discussion Devices go out.
– To indicate that the Control Unit is in ‘standby’, the green power on LED on the front
panel is lit, and the Discussion Devices volume control LED flashes slowly. All other
LEDs are off.
– The ‘waiting list’ and ‘speakers list’ are cleared.
– Recording is stopped, if active.
– Cancel: Closes the power pop‑up window.
Logging
Preconditions:
–
The logged on user must have the access right: Configure.
Click the Logging button on the homepage to open the logging page.
Logging is used for automatically saving system events, such as date, time and (error) type of
the event:
–
Use the ‘clear view’ button to clear the logging view. The logged events will not be
deleted and will be displayed when the logging page is reopened. When the logging view
is cleared, the logged events can still be exported.
– Use the ‘export’ button to export and save the current event logging overview file (*.txt
format) on the hard‑drive of your tablet / PC.
System info
Preconditions:
–
The logged on user must have the access right: Configure.
Click the System info button on the homepage to open the system info page. The following
information is displayed:
–
Device type
– Host name
– Ethernet MAC address
– Ethernet IP address
– Ethernet Subnet mask
– Ethernet Default gateway
– Software version (build)
System info is used by a technician.
Logout
Click the Logout button on the homepage to log out from the discussion application.
The login page is displayed.
7.4.7
7.4.8
7.4.9
7.4.10
Digital Discussion System Configuration | en 51
Bosch Security Systems B.V. Operation manual 2016.05 | V2.0 |