18
C 60 Start-Up
Internal | BEG/EMS1 CsM
| 6/4/2010 | ©
Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Motorsport
C 60 Start-Up
Install the software required for C 60 operation
RaceCon
–
C 60 setup, configuration and calibration
WinDARAB
–
Measurement data analysis
Set up the online connection to the C 60
100MBit Ethernet connection to the C 60
All three Ethernet ports of C 60 internally connected by a network switch
All Ethernet ports have ‘cable auto crossover’
functionality
Minimum wiring loom:
Life connector (red)
Pin 1+2+3 12V supply voltage
Pin 4+5
GND supply voltage
Pin 6
Ethernet Tx+
Pin 7
Ethernet Tx-
Pin 8
Ethernet Rx+
Pin 9
Ethernet Rx-
Pin 10
Ethernet Screen