7. Whether the dishwasher is upside-down or on it’s back, all
bottom accessible parts are accessible
(see below)
.
5.2
Controls
5.2.1
Fascia panel mounted controls (integrated models)
Controls are easily removed from fascia panels by prying plastic
tabs.
Tools needed: T-20 Torx & flat blade screwdrivers
.
1.
Remove fascia panel
– section 5.1.2.2. If needed,
remove outer door first
(below left)
.
2. For dishwashers with separate short wire harnesses,
disconnect them from both ends of fascia panel
(below
right)
.
3. Disconnect wire harnesses from control
(below left)
.
4. Carefully pry back plastic tabs, then slide module from
console
(below right)
.
5. Replacement controls include the translucent button cover,
so there’s no need to remove it.
m
CAUTION
– 80% of all controls returned
for analysis check out OK. Most control
issues are due to loose connections.
702_58300000130262_ara_en_c
Page 24 of 50
